i tightend the inverted torx and while i have it apart i noticed alot of play in the steering shaft itself. i noticed the bearing right below the steering wheel is missing a ball and looks like it has no outer case i was wondering if it was supose to be like that.. minus the ball i know there is not supose to be any of the ***** missing but i figured while its apart i could replace it and would it be a normal bearing or is it specialy designed for the steering shaft. when i removed it, it was basically just a inside of a bearing with the outside exposed.also if anyone has experience with the tightning of the torx when i removed the white plastic piece for the blinker/wiper switch a black piece fell out that goes to the brites about an inch long and has a curved edge, one side has open slot and kind of flat on the other... i did not see how it fit in. anyone have an idea let me know. thanks for the help in advance.

 

search s10 tilt steering loose on you tube there are three videos there should help

 

http://www.fiero.nl/forum/Forum2/HTML/088020.htmlif you have a gm coloum this should help