jhd8593

Hey Everyone!

I recently wired up a keyless entry system from amazon "https://www.amazon.com/Proline-REC43T-Basic-Keyless-System/dp/B00C92O5KS/ref=cm_cr_arp_d_product_top?ie=UTF8"
and got unlock and lock to work!! Probably the best money I spend on my keep yet!

My question is...How do I get my lights to flash when locking?

Im guessing this link would be useful: https://www.the12volt.com/installbay/alarmdetail/1211.html


Thanks in advance!

Jon

awg

To get the lights to flash, be aware they are activated by a switch to earth.

I fitted a cheap "Universal" keyles entry system a couple of years ago, and am very happy with it

The Instructions that came with it, were quite poor however, translated from Chinese, and did not make it very clear, even had wrong wire colors stated!

Look for one that says "Courtesy light"..if not, using a test light or multimeter, identify likely wires and test which one earths when you press the button

revolver

skip to m 20 where he talks about the lights.