Bad hub assembly??
Thread Starter
Junior Member
Joined: Sep 2010
Posts: 99
Likes: 0
From: So-Cal
Year: 2001
Model: Cherokee
Engine: 244 c.i.
Bad hub assembly??
Changed ball joints, tie rods, axle u-joints, and still clicking when turning, mostly to the right. All the above parts where worn anyways. Any ideas. Thanks.
Seasoned Member
Joined: Sep 2010
Posts: 325
Likes: 0
From: Portsmouth,VA
Year: 96
Model: Cherokee
Engine: 4.0 I6
jack it up and see if you have any play in the wheel. like shake it up and down and side to side. if you do then thats your problem. they are $100 bucks and about 30 minutes of your time.
Thread
Thread Starter
Forum
Replies
Last Post
lgrant
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
Jul 5, 2022 12:19 AM
NM-XJ
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
18
Oct 23, 2018 04:21 PM
SouthSeaPirate
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
Sep 7, 2015 11:29 PM
Sandyman
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
5
Sep 5, 2015 07:56 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)