back and forth with steering wheel?
Thread Starter
Senior Member
Joined: Feb 2010
Posts: 713
Likes: 0
From: central michigan
Year: 1997
Model: Cherokee
Engine: 4.0
When im driving down the road even with cruise on i always seem to be back and forth with the steering wheel. like side to side. and when i hit bumps its worse. i just want to hold the steering wheel with very little movement. its almost as if i were driving drunk or something. lol. i dont know what would do this. by the way its lifted 4.5" if it makes a difference. can i get some help please
CF Veteran
Joined: Jun 2009
Posts: 2,173
Likes: 0
From: Columbus, Ohio
Year: 1997
Model: Cherokee
Engine: 4.0, comp cam, 99 intake, apn header, neon injectors, Thunderbolt 2.5" High Flow Cat
mine does the same thing... there's a laundry list of things I suspect... ball joints, tie rod ends, upper control arm bushings, caster, maybe even my steering box? lol. I'm curious to see what responses you get.
I had the same issue with my 89. Ended up being a few different things and each made a small improvement.
2 TRE's
Upper mount on track bar
steering box needed adjusted
I still have the smallest bit of "wandering" in the front end, waiting on the lower bushing for the RE track bar right now.
Each made an improvement, and the total feel is much better. I don't look like a drunk cruising down the road any more.
2 TRE's
Upper mount on track bar
steering box needed adjusted
I still have the smallest bit of "wandering" in the front end, waiting on the lower bushing for the RE track bar right now.
Each made an improvement, and the total feel is much better. I don't look like a drunk cruising down the road any more.
Junior Member
Joined: Nov 2008
Posts: 38
Likes: 0
From: caledon, ontario
Year: 1990
Model: Cherokee
Engine: '92 4L I6 H.O.
for me it was that EVIL track bar upper bushing, any bump, and things got uncomfortable... almost hit a guardrail on the highway on the way to the shop... not fun (I HATE WIND)
Thread Starter
Senior Member
Joined: Feb 2010
Posts: 713
Likes: 0
From: central michigan
Year: 1997
Model: Cherokee
Engine: 4.0
well i just got a prothane total bushing kit and it has the track arm and upper control arm bushings included so i will get those installed and i had already planned on getting ball joints and TRE's. i will let you guys know whats up after i do these things
Thread
Thread Starter
Forum
Replies
Last Post
SwankyXJ
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
11
Aug 22, 2015 09:16 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



