Axle Swap from 95 to 89?
#1
CF Veteran
Thread Starter
Join Date: Jul 2009
Location: Keesler AFB, MS
Posts: 1,640
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998 XJ
Model: Cherokee
Engine: 4.0L
Axle Swap from 95 to 89?
A buddy of mine wants to buy an 89 XJ as long as the rear axle from his 95 will bolt right under the 89. He wants to swap axles because his 95 has a locker already installed.
Thanks
Thanks
#2
CF Veteran
sure will. he'll need new u-bolts tho.
and of course, check the gear ratio.
if it's a different axle (8.25) then he may need the drive shaft also, if they're both either auto or stick.
and of course, check the gear ratio.
if it's a different axle (8.25) then he may need the drive shaft also, if they're both either auto or stick.
#5
That won't be much help considering he 89 D35 is a non c-clip axle and the 95 D35 is c-clip. He would be better off locking the 89 axle vs swapping in the 95. At least that when the axle does break the shaft won't slide out of the tube.
Best bet would be a 29 spline Chrysler 8.25 out of a 97+ XJ.
Last edited by winston427; 03-23-2011 at 11:25 PM.
Thread
Thread Starter
Forum
Replies
Last Post
lgrant
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
07-05-2022 12:19 AM
Ibanezz
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
24
09-10-2015 07:15 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)