Axel
Trending Topics
CF Veteran


Joined: Jun 2011
Posts: 2,720
Likes: 44
From: Gainesville GA
Year: 1999
Model: Cherokee (XJ)
Engine: 4.0
Pull the wheel & drum & there should be 4 bolts holding a plate on.The plate holds the axle in.
CF Veteran
Joined: Oct 2011
Posts: 1,339
Likes: 0
From: Yakima
Year: 1990
Model: Cherokee
Engine: 4.0 I6
the 8.25 29 spline is leaps and bounds better than the d35. Sure it has c-clips. Quit raining on his parade.
I run a locked 8.25 29 spline WITH c-clips on 35's with stock shafts. I dont worry about it at all.
I run a locked 8.25 29 spline WITH c-clips on 35's with stock shafts. I dont worry about it at all.
i read alot about the 8.25 and how underated it is, and how much beter it is then a d35, also the differance between the 27 spline and 29 spline 8.25,
and tons of people runing lockers and welded difs with no problems,
i paid 100$ for a complete rear with u bolts and brackets, its the same gearing and i just need to swap my brakes
cheaper then any axles il ever find for the d35
go on google and look up d35 blown up and 8.25 blown up i cant even find a thread about one , even if it happens not as bad as a d35
and tons of people runing lockers and welded difs with no problems,
i paid 100$ for a complete rear with u bolts and brackets, its the same gearing and i just need to swap my brakes
cheaper then any axles il ever find for the d35
go on google and look up d35 blown up and 8.25 blown up i cant even find a thread about one , even if it happens not as bad as a d35
Last edited by morgan320i; Dec 3, 2012 at 07:37 PM.



