AX-15 Rebuild Question

Reply Subscribe

Thread Tools

Search this Thread

Dec 5, 2018 | 05:29 PM

#16

4.3L XJ

CF Veteran

Joined: Aug 2008

Posts: 6,588

Likes: 495

From: Chico, CA

Year: 1986

Model: Cherokee

Engine: 4.3L with headers and full 3" exhaust system

Quote:

Originally Posted by SRWest

So basically just get a new AX-15 from the junkyard or such, and just do the rebuild/syncros on the new one, instead of replacing the cluster gear and input shaft on mine with the new syncros etc..?

that is correct. Basically as I look at it, if I was going to fix this I would have to replace everything but the case, rails and forks. There are going to be pits in the gears, which will howl when in gear and you will have pits on the cluster shaft etc. It can be done, but the cost to do it right will be high

Dec 5, 2018 | 05:32 PM

#17

SRWest

Thread Starter

Newbie

Joined: Dec 2018

Posts: 9

Likes: 0

Year: 1996

Model: Cherokee (XJ)

Engine: 4.0 I6

Yes...true true. Figured when I pull all the gears and bearings off to replace all the syncros and such I will do a thorough cleaning on everything and make sure there are no filings hiding anywhere. But yes, inside the gear case, it looks like a gear literally exploded in there.....even smells burnt :/