mentalbreakdown00

Hey guys I know its been discussed but im not good woth searches and short on time. Will a 1995 Dodge Dakota V8 NV3500 ( I think) swap in place of my ax-15?

bryweb

And while looking for answers for you I find this post !!!

From researching on the internet - which we all know may or may not be right.

So far the NV3550 that is in a TJ is different than the NV3500 in the 95 Dodge Dakota.

I also found out that the transmission on a Jeep bolts to the bellhousing, where on a Dodge it is all one piece.

http://www.allpar.com/mopar/transmissions/NV3500.html

Now I read it is not going to work if the Dodge 4.7 and 5.2 share the same bell housing bolt pattern that is.;

http://www.pirate4x4.com/forum/jeep-...-0l-motor.html

And TJ vs. Dodge they say the starter bolts on the other side, but this may all be different when it comes to bolting it in your XJ

http://www.jeepsunlimited.com/forums...d.php?t=170987

Bryan

freegdr

Don't think 3550 came with non bolted on bell housing and should bolt to ax 15 bell housing.

bryweb

He has a lead on a 95 Dakota 5.2L 4x4 NV3500 and was wondering if the bellhousing would bolt to a 4.0L

Bryan