Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here XJ (84-01)
All OEM related XJ specific tech. Examples, no start, general maintenance or anything that's stock.

awfull noise on the freeway :/

Thread Tools
 
Search this Thread
 
Old Jul 1, 2012 | 07:44 PM
  #1  
tyrhine's Avatar
Thread Starter
Member
 
Joined: May 2009
Posts: 181
Likes: 0
Model: Cherokee
Default awfull noise on the freeway :/

hi so im having an issue pinpointing where the noise is coming from but heres whats going on. when i get over 30ish its starts making a loud wamp wamp wamp kinda like an old dryer machine. when im decelerating it starts shaking the car feels like from the rear end. haven't had a chance to start looking at it but just trying to get an idea where it might be coming from so i can start looking into it
Reply
Old Jul 1, 2012 | 08:24 PM
  #2  
Jonwebb's Avatar
Member
 
Joined: Jan 2012
Posts: 150
Likes: 0
From: New Baltimore, Michigan
Year: 2001
Model: Cherokee
Engine: 4.0
Default

Probably wheel bearings
Reply
Old Jul 1, 2012 | 08:25 PM
  #3  
tyrhine's Avatar
Thread Starter
Member
 
Joined: May 2009
Posts: 181
Likes: 0
Model: Cherokee
Default

so thats what im guessing. on the drive home found some more info. it only does really while its in gear. when im taking a sharp left it will clank once or twice super loud
Reply
Old Jul 1, 2012 | 10:17 PM
  #4  
Radi's Avatar
CF Veteran
 
Joined: Apr 2012
Posts: 5,302
Likes: 23
From: Wisconsin
Model: Cherokee
Default

Check your driveshaft u-joints and pinion bearing while you're under there too.
Reply
Old Jul 2, 2012 | 10:40 AM
  #5  
tyrhine's Avatar
Thread Starter
Member
 
Joined: May 2009
Posts: 181
Likes: 0
Model: Cherokee
Default

is there a good way to figure out what side i should look at? im guessing its the left side because it makes a horrible clunking sound when i turn left. but the rear is welded so wouldn't it do the same thing turning right too?
Reply
Old Jul 2, 2012 | 10:47 AM
  #6  
Jonwebb's Avatar
Member
 
Joined: Jan 2012
Posts: 150
Likes: 0
From: New Baltimore, Michigan
Year: 2001
Model: Cherokee
Engine: 4.0
Default

Check both sides. Go on youtube and check out how to check wheel bearings and u joints, theres some pretty good stuff there. You might wanna look into the front axle shaft ujoints also
Reply
Old Jul 8, 2012 | 01:37 PM
  #7  
tyrhine's Avatar
Thread Starter
Member
 
Joined: May 2009
Posts: 181
Likes: 0
Model: Cherokee
Default

after pulling the diff cover looks like theres a HUGE crack along the differential case and also took acouple teeth with it :/
Reply
Old Jul 9, 2012 | 10:20 AM
  #8  
tyrhine's Avatar
Thread Starter
Member
 
Joined: May 2009
Posts: 181
Likes: 0
Model: Cherokee
Default

so im trying to figure out the cheapest way to fix this issue, it did exaclty what is in this pic http://www.fordf150.net/photos/data/500/broken.jpg / i could replace the whole axle for about 250-300 from junk yards in the area. was also looking into replace the internals but i don't think i would be able to install them ----- im very new when it comes to the internals of a diff :/
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Austindude2015
Cherokee Chat
17
Dec 28, 2020 05:12 PM
LittleRed94
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
5
Oct 6, 2015 08:09 PM
Freakn
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
52
Oct 4, 2015 06:34 AM
Lightning_19k
Modified XJ Cherokee Tech
14
Oct 3, 2015 09:52 PM
redrooster
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
7
Oct 2, 2015 12:35 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 08:13 PM.