Auto to manual engine
11-11-2011, 12:36 PM
#1
Seasoned Member
Thread Starter
Join Date: Jun 2011
Location: Michigan
Posts: 535
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0 HO
Auto to manual engine
Ping a moor swap and the jeep is a 5 speed and the donor motor is outta a auto.. Missing the part on the crank for the clutch bearing???? Idk what to do!
11-11-2011, 01:27 PM
#2
Seasoned Member
Join Date: Sep 2011
Location: Akron/Canton, OH
Posts: 308
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1994
Model: Cherokee
Engine: 4.oh
Go to the parts store tell them you want a pilot bearing for the year of the manual trans, install it in new motor. Assembly is reverse of removal.
11-11-2011, 02:26 PM
#6
Member
Join Date: Feb 2010
Location: Plant City Florida
Posts: 223
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1994
Model: Cherokee
Engine: 4.0
It comes up as a alternator bearing
For got to ask what year is the engine and trans out of
For got to ask what year is the engine and trans out of
Last edited by 94xj5spd; 11-11-2011 at 02:28 PM.
11-11-2011, 02:27 PM
#7
Seasoned Member
Join Date: Sep 2011
Location: Akron/Canton, OH
Posts: 308
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1994
Model: Cherokee
Engine: 4.oh
On the older trannys there is but the one you have should press into the crank. Use a socket and hammer to tap the bearing into the crank.
Trending Topics
11-11-2011, 03:00 PM
#13
Member
Join Date: Feb 2010
Location: Plant City Florida
Posts: 223
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1994
Model: Cherokee
Engine: 4.0
Ya did the same thing your doing I used fc69907 its a sleeve that fits in the first step of the crank and the pilot bearing sits inside of it.