i can get you info on the wires for your constant 12 volt wire starter wire ignition wire accessory wire and if it has one a key sense and if it has one a second accessory wire. these are the wires under the kick pannel that are a thicker set of wires. if anyone needs any info on them i can get it

 

finally, i am thinking of installing a remote start/keyless entry on 98 grand cherokee but i don't know all of what i will need hopefully you can give me the answers. my factory security system has some sort of defect it starts to go off after about 10min of arming it. i'm installing the python 1400xp any help would be greatly appreciated.

 

i can give you the wire colors and location other then that you it should say how to do it in the instructions.. name some wires you need and ill get em

 

do you know if i will need any other components besides what it comes with? it has the brain of the device and thedoor lock module for the power locks.

 

as far as relays or anything to bypass any sort of stock security system

 

I have been using bulldogsecurity.com for all my ignition/starting needs for about 6 years. Head over there and search for your vehicle. I just used them for my 92 XJs keyless entry/starter as I got the system used from Craigslist. Anywho. Check them out.

 

do you know where the tach wire is and what color it is

 

YOu should just create a write-up with pictures and I will place it in the write-ups section.

 

tach wire is grey and white at pcm

 

as for relays and stuff i dont know if you will have to bypass any but the kit should have all the instructions you need

 

ok i got the remote start to work but i can't get the keyless entry to work. how do i tap into the stock keyless entry.

 

you have to re route the the wires to the new control unit im guessing

 

Here is another site with wiring information....

http://www.the12volt.com/installbay/...eard/Jeep.html

 

ok got it but now i noticed that the a/c doesn't turn on itis just the blower that turns on. anyone have a clue already checked all wires and they are all where the wiring chart says