Another 99+ Intake Question
#1
CF Veteran
Thread Starter
Join Date: Nov 2011
Location: Northern MN
Posts: 2,433
Likes: 0
Received 6 Likes
on
5 Posts
Year: 1990
Model: Cherokee (XJ)
Engine: Renix 4.0
Another 99+ Intake Question
So my dad has a 96 XJ that I am going to install an APN and he would also like a newer manifold for obvious reasons. Will he need a new PS bracket to go with it? Will his current injectors fit? TIA
#2
CF Veteran
Join Date: Feb 2010
Location: Oroville, CA
Posts: 12,367
Likes: 0
Received 19 Likes
on
18 Posts
Year: 1995
Model: Grand Cherokee
Engine: 4.0 with all of the noise and clatter
The 96 P/S pump and bracket will work with the 99+ intake manifold. The 96 injectors will work too, but it would be a great time to swap in some 95-97 Neon 703 injectors while you do the intake swap.
#4
CF Veteran
Thread Starter
Join Date: Nov 2011
Location: Northern MN
Posts: 2,433
Likes: 0
Received 6 Likes
on
5 Posts
Year: 1990
Model: Cherokee (XJ)
Engine: Renix 4.0
Another question, are there any vacuum line differences between the two manifolds? I want to know exactly what I'm getting into this time.
#5
Seasoned Member
Join Date: Nov 2011
Location: pa!
Posts: 357
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
My 95 I had to trim the intake and the vacuum lines need to be extended not hard at all you can swap one pf the fittings out so you don't have to adapt it to become bigger, and might as well do an injector swap, also for another 150 u can get a bored tb
#6
CF Veteran
Join Date: Feb 2010
Location: Oroville, CA
Posts: 12,367
Likes: 0
Received 19 Likes
on
18 Posts
Year: 1995
Model: Grand Cherokee
Engine: 4.0 with all of the noise and clatter
96 has the same PS pump mounting as the 99, so you lucked out there. The vacuum lines are a no brainer, you may have to extend or shorten one or two in order to reach the nipple. The fuel line bracket will need a hole drilled between the two holes that are already there, and you may need to bend and tweak it a little for the best fit. The hardest part of the swap is getting the lower manifold bolts into the holes, if you have small hands it won't be that tough, but when you have big ol dick skinners like mine it is a pain in the butt!
Thread
Thread Starter
Forum
Replies
Last Post
Programbo
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
21
09-26-2015 11:32 AM
travellinmike
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
09-11-2015 05:11 PM
JamDeeper
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
09-08-2015 08:50 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)