Hello all. I have been trying to cure my '93 XJs "Death Wobble" problem and after changing my track bar yesterday I noticed one front tire on my Jeep seemed to be straight ahead and the other turned outwards a bit. When I measured the distance from center of tire to center of tire I found the distance was 3/8" more on the front than the rear. This was measured with all 4 tires on the ground not on a lift or jacked up etc.

I know some vehicles have "toe-in" or "toe-out" but does this measurement seem way off or anything?

 

Trac bar does not affect alignment. Its used to center axle under vehicle. To should be 1/8 smaller in front more than rear.

 

http://www.go.jeep-xj.info/HowtoAlignment.htm

 

If one wheel is turned while the other is straight, I'm not sure its a toe adjustment. Sounds like something is bent or worn out. I would suggest checking the ball joints first.