I've searched around, found a few specs for stock XJ's and 2 different ones for lifted. I have a 97 AX-15 4.0 w/ 3" Lift. Just wanna know the specs when I go to have her aligned to make sure the shop gets it right.

 

it goes by stock spec. make sure castor isnt more then 7.

 

So Camber should be 0 Degree (+1/2 to -3/4 is acceptable)
Caster is 6.5 degree for manual tranny (No more than 7)
Toe-in is 0" (+1/8 or -3/32 ok)

Is that correct?