After a long hiatus
04-11-2015, 12:37 PM
#1
Newbie
Thread Starter
Join Date: Jul 2012
Location: Piedmont, SC
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0
After a long hiatus
After a long hiatus, and finishing school I'm ready to tackle my jeeps big problems. I have kept General maintenace meticulously and now am ready to take on the bigger jobs.
I have a roar of a noise when turning right on deceleration like going around an exit ramp off the highway. I have replaced wheel bearings recently and replaced ball joints and front components minus u joints on axles and Ucas. I have not replaced any differential components either.
I have a leaky dana 30 pinion seal. And am wondering if taking the front ds off will help me diagnose pinion bearings?
While the roaring noise is happening I feel vibration under the driver side floorboard.
This is the first of many issues.
Any input would be greatly appreciated
I have a roar of a noise when turning right on deceleration like going around an exit ramp off the highway. I have replaced wheel bearings recently and replaced ball joints and front components minus u joints on axles and Ucas. I have not replaced any differential components either.
I have a leaky dana 30 pinion seal. And am wondering if taking the front ds off will help me diagnose pinion bearings?
While the roaring noise is happening I feel vibration under the driver side floorboard.
This is the first of many issues.
Any input would be greatly appreciated
Thread
Thread Starter
Forum
Replies
Last Post
Dsach
Vendor Showcase
0
09-17-2015 11:09 AM
hogluvr
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
7
09-16-2015 08:15 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
