I need adjustable ones i hve a 3 in series 2 rough country lift i put in my self went to get it alliged and told me i need the adjustables so it would be perfect does rough country make these of do i need got another brand wht do you reccomend ? Any helps appreciated

 

IRO makes good stuff.

http://www.ironrockoffroad.com/Merch...Category_Code=

 

are you sure it is not lower adjustable's that you need?

 

stock lowers are adjustable. look on back of bracket. I have a six inch lift with stock uppers (i think) and i have mine aligned perfect.

shouldnt need em. save the money and put it in a long arm lift fund...

 

You don't need adjustable upper control arms until you lift it more than 4.5"

Lift...........Lower Control Arms/Upper Control Arms
********Decimal**Fraction**Decimal**Fraction
Stock........15.75.......15 ¾........15.00........15
2”.............15.92.......16............14.88 .... ...15
3”.............16.09.......16............14.92 .... ...15
4”.............16.33.......16 3/8......15.03........15
4.5”..........16.47.......16 ½........15.11........15
5”.............16.62.......16 5/8......15.21........15 ¼
6”.............16.97.......17............15.44 .... ...15 ½
7”.............17.36.......17 3/8......15.74........15 ¾
8”.............17.81.......17 ¾........16.09........16
9”.............18.30.......18 ¼........16.50........16 ½
10”...........18.82.......18 ¾........16.96.........17

 

I don't have stock arms there the rough country ones that came with the kit

 

I bet he meant adjustable track bar. If you did not move the track bar or get an adjustable one then you are shifted over to the drivers side by 3/4". That dose through things off a bit.