ABS light on
#1
Newbie
Thread Starter
Join Date: May 2013
Location: Austin
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
ABS light on
Did a quick search and didn't really see anything that I thought was pertinent to my situation. I just picked up a 2000 XJ with about 111k on the body and drive line. Everything stock except for the motor which has been replaced. I do have an ABS light on and am curious as to where to start to get that dang thing off. I plan on bleeding the system tomorrow but have no clue where to look after that. I do not have a CEL and all the gauges work fine. What has worked for you bedsides pulling the bulb? I need inspection and I highly doubt that trick still works.
#3
Newbie
Thread Starter
Join Date: May 2013
Location: Austin
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
Bleed the sides that were not stripped and checked the sensors. Didn't see anything. The light is initially off and comes on at about 10 mph. Oh and FYI the ABS light wont fail a Texas inspection unless there is another light on.
Last edited by Silver_XJ; 05-16-2013 at 09:31 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Coffinshaker
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
8
10-12-2015 08:27 AM
nrwphoto
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
09-09-2015 10:41 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)