ABS Brake bleeding?
07-02-2010, 07:06 AM
#1
Member
Thread Starter
Join Date: Oct 2009
Location: Ironton Ohio
Posts: 121
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1994
Model: Cherokee
Engine: 4.0
ABS Brake bleeding?
I have a 94 Cherokee with ABS I recently replaced the master cylinder and bled the brakes as normal. The brakes a good now, not great. Now I need to cycle the ABS pump, problem is I don't have a DRB scan tool and I'm not going to the dealer (previous owner took it there and they couldn't diagnose a bad master cylinder, not to mention I'm broke right now so a shop is out of the question)
I have seen many references to manually turning on pump by installing a switch or jumping pins but no instructions. Anybody know how to do this?
Any help will be appreciated.
I have seen many references to manually turning on pump by installing a switch or jumping pins but no instructions. Anybody know how to do this?
Any help will be appreciated.
Thread
Thread Starter
Forum
Replies
Last Post
NM-XJ
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
18
10-23-2018 04:21 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)