...
i have an 89 cherokee 4.0L... the question is, can i swap the 4.0L out of a 93 grand cherokee into my 89 cherokee??? as far as i know they are pretty much the same but wanted to make sure before i buy the 93... thanks for any help
Last edited by D-Day; Feb 4, 2013 at 07:05 PM.
CF Veteran
Joined: Nov 2008
Posts: 7,874
Likes: 100
From: Northern Ontario, Canada
Year: 1990, 1999, 2000
Model: Cherokee
Engine: 4.0
the 93 is an H.O.
your 89 is renix, so it's not as simple as pull one and drop the other.
you will need to do a lot of swapping bits and pieces. (head/manifolds, throttle body, etc.) but it can be done.
actually, since it's from a zj, i would say no. i wouldn't bother anyways.
your 89 is renix, so it's not as simple as pull one and drop the other.
you will need to do a lot of swapping bits and pieces. (head/manifolds, throttle body, etc.) but it can be done.
actually, since it's from a zj, i would say no. i wouldn't bother anyways.
Herp Derp Jerp

Joined: Nov 2011
Posts: 18,251
Likes: 17
From: Parham, ON
Year: 1999
Model: Cherokee
Engine: 4.0L OBD-II
Block-wise yes, but you'll need to keep your wiring and a few Renix-specific bits like the sensors and manifolds for the EGR and throttle body setup
For clarification:
XJ Cherokee and ZJ Grand Cherokee 4.0L engine blocks interchange.
2000+ TJ Wrangler and WJ Grand Cherokee 4.0L engine blocks interchange.
XJ/ZJ blocks and 2000+ TJ/WJ blocks do not interchange without significant modifications. (1997-1999 4.0L TJ Wrangler blocks will interchange in XJ/ZJ and visa-versa).
TJ/WJ 4.0L Engine blocks underwent clean sheet design changes effective in the 1999 WJ Grand and 2000 TJ Wrangler. These blocks are not interchangeable with XJ/ZJ engine blocks. The reason is motor mount bolt holes and belt driven accessory mounting bolt holes are in different locations, or not present at all, TJ/WJ vs. XJ/ZJ.
XJ Cherokee and ZJ Grand Cherokee 4.0L engine blocks interchange.
2000+ TJ Wrangler and WJ Grand Cherokee 4.0L engine blocks interchange.
XJ/ZJ blocks and 2000+ TJ/WJ blocks do not interchange without significant modifications. (1997-1999 4.0L TJ Wrangler blocks will interchange in XJ/ZJ and visa-versa).
TJ/WJ 4.0L Engine blocks underwent clean sheet design changes effective in the 1999 WJ Grand and 2000 TJ Wrangler. These blocks are not interchangeable with XJ/ZJ engine blocks. The reason is motor mount bolt holes and belt driven accessory mounting bolt holes are in different locations, or not present at all, TJ/WJ vs. XJ/ZJ.
the block from the 89 needs work... but i can swap the head manifold and throttle body they are not on the 89 eng. right now anyway...basically i would have to swap the block and i would be ok???
CF ADMIN

Joined: Sep 2010
Posts: 34,088
Likes: 257
From: Lantana, Fl
Year: 1996
Model: Cherokee (XJ)
Engine: 4.Slow
Herp Derp Jerp

Joined: Nov 2011
Posts: 18,251
Likes: 17
From: Parham, ON
Year: 1999
Model: Cherokee
Engine: 4.0L OBD-II
NP, real pain to find stuff on my phone though haha
D-Day I believe you'll need to tap a boss for the knock sensor. Otherwise the blocks are the same.
D-Day I believe you'll need to tap a boss for the knock sensor. Otherwise the blocks are the same.
Thread
Thread Starter
Forum
Replies
Last Post
shelby5041
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
Jul 20, 2016 04:38 PM
Hootis
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
5
Sep 29, 2015 11:43 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



