Godwin91

I NEED help ASAP on my 1999 xj about the gauges! Not one of my gauges on the das works but the aitbag light, i have an engine code for no ccd bus message and the trany does`nt read. the engine light works but doesnt light up, and when i do the self check all the lights on the dash work and all the needles work. The jeep shifts fine and runs perfect. my overhead display doesnt work either that tells me the temp and mpg etc. I recently took it to a 4x4 shop and in the long run spent 550$ for a 1 yr temporary inspection and nothing else fixed! they explained that they checked continuity in the wire, tryed a new dash, new tcm, new pcm , and cleaned all the grounds and nothing fixed it!!! Also all fuses were checked and they claim everything said it was working on the scanner and read that the dash was working. i only have a temporary so i dont have long!! i dont have the money to take the jeep everywhere for no 1 to fix it...Some jeep magian plz help me!!!

CRoading

This is pretty weird since all of the possible cause has been checked... Have you tried consulting other 4x4 repair shop... Its better to get opinion from other repair shop as well...