Anyone know who/where I can get one? Seems mine has worn a small hole from rubbing on another hose on the hood.

Also, is it a big deal if I drive it with a hole in the line? Its about a foot from where it goes into the valve cover. Its had to be there for some time as the hole is probably 3/16" of an inch across, but I just noticed it today. Any ideas? Thanks!

 

rubber hose patch cut the bad section out and stick the two ends in the hose

 

My local parts store doesnt have anything that will fit. Do you know what size rubber hose exactly? They had stuff that was way too small, or way too big. I appreciate the help.

Again, any big deal driving it like this? I need to head 3 hours down the highway to the city and Im sure I could get some parts there. Should I risk it, or make due with what I can get here?

 

vacuum line either that or another store

 

Got my two emissions lines (which go into the cover) from the dealer 2 years ago, and they were fairly inexpensive. I replaced them because I had to remove the cover to do the gasket replacement, and both grommets were hardened and came apart.

 

Appreciate it. Im heading to the "city" tomorrow and Ill check around. Problem is, Im in the middle of nowhere, northern Maine, and parts are HARD to come by. Im like 2 hours from a "real" city, and 3 from an actual city so I do my parts shopping mostly online.