jimbosxj

The issue is the door locks and or the pass, window will not function then they will I've looked at the door wiring and found that the pass. front door wiring has been repaired before. Rechecked the repair and it was ok but went and solder the wire's and shink wrapped. Now it seem's after the car sit's over night it crank's just slow or fast enough that it will not start put a jumper box on and it starts Did a amp draw and it was normal .03 millamps this does not happen all the time but has been getting worse I've tried to elimate door's by the process of elimanation but no help At this point I,m thinking to pull the door harness on each door one at a time and fuse's to come up with a solution. I know the door harness's are a issue but I have no other evidence that there is a wire or wire's causing this. Has any one found something that could be related. Thanks in advance