96 xj. Starting issue. Injector clicks when in ON position.
Thread Starter
Newbie
Joined: Mar 2013
Posts: 11
Likes: 0
From: Kalamazoo
Year: 1996
Model: Cherokee
Engine: 4.0
I've got a 96 xj. And when when I turn the key to the ON position a injector keeps clicking. I also wasn't getting spark and went through and replaced a bad ignition coil, new cap and rotor and just replaced the crank position sensor. The battery is good. I take it out of my DD and into the jeep. Pulled a few plugs. And it is getting plenty of fuel. Especially the cylinder the injector is clicking on. Help would be greatly appreciated. Thanks for the time
Still no spark?
The clicking injector- is it a steady click or intermittent? Intermittent I'd check the wiring harness. Shake it and see if it changes. Steady I'd look at the PCM for an injector driver failure.
The clicking injector- is it a steady click or intermittent? Intermittent I'd check the wiring harness. Shake it and see if it changes. Steady I'd look at the PCM for an injector driver failure.
Thread Starter
Newbie
Joined: Mar 2013
Posts: 11
Likes: 0
From: Kalamazoo
Year: 1996
Model: Cherokee
Engine: 4.0
It's pretty consistent. And still no spark. Going to buy a new pickup switch (cam position sensor) in a minute. Does the PCM control spark as well? I've kinda been thinking about the PCM for a bit now but I've been going through a process of illimination of cheaper stuff first.
Last edited by Jeeporv; Mar 23, 2013 at 07:59 AM.
Thread
Thread Starter
Forum
Replies
Last Post
Blackcherokee290
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
28
Jan 8, 2025 11:36 PM
Tj Cope
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
21
Nov 16, 2022 08:32 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



