95 jeep Cherokee heater
08-17-2013, 12:39 PM
#1
Newbie
Thread Starter
Join Date: Aug 2013
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
95 jeep Cherokee heater
I have no heat took both heater hoses off and flushed the heater core and still the hose coming from the water pump don't get hot. It ain't circulating any suggestions
08-17-2013, 04:35 PM
#4
Newbie
Join Date: Aug 2013
Location: PITTSBURGH
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0
Remove thermostat and reconnect all hoses. Start jeep and warm up. If no heat is present yet, pull hose from thermostat ,have someone start jeep. Increase rpm and notice fluid discharge. It should shoot out like a garden hose as you increase the rpm. If not, more than likely the impellers on the water pump are rusted off. I know this from experience!
08-17-2013, 07:36 PM
#5
CF Veteran
Join Date: Sep 2011
Location: Riviera, Texas
Posts: 4,172
Likes: 0
Received 4 Likes
on
4 Posts
Year: 1998 Sport
Model: Cherokee
Engine: 4.0
Do you still have the crappy heater control valve on the heater hose? If you do it can be getting stuck in the closed position. If that is the case just remove it and bypass it. They are worthless anyways and not needed, In the latter years they stopped installing them.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)