I just finished putting a 95 4.0 into my 98 that had a 4.0 and it won't start. Starter turns engine over. I bled the fuel rail. I've got a couple of leaky injectors to fix. I did not swap intake manifolds, but swapped my 98 sensors into the 95 motor. I did not swap distributors, nor did I pull them out. Plug wires are in line with firing order. I put starting fluid in throttle body & she sputtered, so I'm getting spark. Fuel comes out bleeder valve and leaky #1 injector, so its getting fuel. If it doesn't start once I've fixed leaky injector, where should I look next?

 

Crank position sensor