92cherokee4.0

So now my "Check Antilock" light has decided to come on. After much research online I found a youtube video this dude made showing how to pull the code via the blinking "Check Engine" light. I came up with 1235733555. Does this make any sense? I cant find abs codes for my 92 online anywhere. I have noticed that when I normally turn on the ignition I can hear a little thump and then the light goes out. But now, no thump and the light stays on. ????

bluesky65rs

I am curious also. I have a 1995 XJ but mine intermittenly comes on then goes off. It started after some heavy rains but it has been dry for the last two weeks and I am still getting an intermitten ABS indicator.

TrekkerJmm

Here is a list of codes...Tj

The "Key Tricks"
Older (OBDI) models - Start with the ignition off. Within five seconds, switch the key on, off, on, off, on. ("On" is NOT "Start" and "Off" is NOT "Lock"). The "check engine" light will flash. Count the flashes. Each code is a two digit code, so a (for example) 23 would be FLASH FLASH (pause) FLASH FLASH FLASH (long pause). It will never flash more than 9 times, so watch for those pauses!

Newer (OBDII) models - Put the key into the ignition, push down the odometer reset button, then turn the key to RUN with your finger on the button - and then release the button. The odometer will go through 1111111 through 999999, then display the car's serial number. It will then show the error codes (it might show them starting with P). If this method does not work, try the OBDI method.

http://jeephorizons.com/phpbb/viewtopic.php?t=2719

bluesky65rs

Thanks for the info