91 Engine Races at Every Start
Thread Starter
Senior Member


Joined: Dec 2015
Posts: 935
Likes: 49
From: Nationwide, USA
Year: 89
Model: Cherokee
Engine: Renix 4.0
Hard starting in cold temps when engine is cold, sometimes to the point I have to floor the accelerator to get it to start. Will then run very rough and will smooth out as engine heats up, eventually RPMs will come down to normal. Even with hot engine in warm temps it will race upon startup, as though its cold and needs to heat up. RPMs will eventually come down to normal. Occasional high idle at stoplights. IAC clean and functioning, TB cleaned, TPS tested and seems to be consistent and within spec, new front temp sensor.
Codes are:
12
75
73
35
55
12&55 are normal/meaningless.
I cant find any reference to 75&73
35 says its a fan relay problem.
Useful ideas?
Thank you.
Codes are:
12
75
73
35
55
12&55 are normal/meaningless.
I cant find any reference to 75&73
35 says its a fan relay problem.
Useful ideas?
Thank you.
Thread Starter
Senior Member


Joined: Dec 2015
Posts: 935
Likes: 49
From: Nationwide, USA
Year: 89
Model: Cherokee
Engine: Renix 4.0
See if this will help:
https://jeep.obd1codes.com/#
https://jeep.obd1codes.com/#
This page at the bottom lets you select the model Jeep you have:
https://jeep.obd1codes.com/code-75
https://jeep.obd1codes.com/jeep-cher...rouble-code-73
https://jeep.obd1codes.com/jeep-cher...rouble-code-75
https://jeep.obd1codes.com/code-75
https://jeep.obd1codes.com/jeep-cher...rouble-code-73
https://jeep.obd1codes.com/jeep-cher...rouble-code-75
Thread
Thread Starter
Forum
Replies
Last Post
domestic82
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
4
May 14, 2020 12:37 PM
bjefferies94
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
Feb 1, 2017 12:39 PM
88XJSteve
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
May 20, 2016 11:33 AM
ajess
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
18
May 15, 2012 10:19 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



