This is what i got so far in my kit, it is 1990 cherokee 4L auto with chrysler rear end, if i need anything else please let me know!! thanks

• Front coil springs designed to give a full 4.5" of lift while maintaining an factory style ride
• Only 2" bump stop extensions are included because our springs are designed for extreme travel.
• New extended sway bar links are supplied with urethane mounts for long term performance
• Front greasable lower control arms are included that are made from 1-3/4" O.D. x 1/4" wall DOM tubing
• Long, thin add-a-leafs for the rear that offer a smooth ride as well as hold up over time
• New rear U-bolts are included with high nuts and washers
• Extended length shackles are also supplied for the rear to allow your springs to really flex!
• New front and rear shocks are included that are valved specifically for your XJ
• Steering Stabilzer
• SYE
• brake lines from 95 yj (front) 96 dakota (rear)

 

sounds like u got it? but did u put in the chrysler rear end or PO? 90 was before they had chrysler rear end,im just wondering

 

what about an adjustable track bar...maybe i just didnt see it there..

 

(The easiest way to tell the difference is to measure the I.D. of your rear u-bolts. The Chrysler rear end uses a 3" I.D. u-bolt and the Dana 35 rear axle requires a 2-3/4" I.D. u-bolt.)

this is what i was told to do and when i measured the u-bolt i got 3" but i might phone the chrysler dealer ship and get them to tell me what one is in their cause is bone stokc right now.

No i dont got a adjustable track bar you think ill need one? if so ill be getting one, i thaught the stock one would work

 

u will either have the dana35 or the dana44

 

Well the trackbar helps center the axle and 4.5 lift I think will make the stock one too short. I have an adjustable on mine but you can always do the the and see how it fits and rides