Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here XJ (84-01)
All OEM related XJ specific tech. Examples, no start, general maintenance or anything that's stock.

90 xj lift

Thread Tools
 
Search this Thread
 
Old Jun 15, 2009 | 09:31 PM
  #1  
river_runner81's Avatar
Thread Starter
Newbie
 
Joined: Apr 2009
Posts: 20
Likes: 0
From: Putnam, Oklahoma
Year: 1990
Model: Cherokee
Engine: 4.0L
Default 90 xj lift

what's the best way to get a couple inches on the rear end? i've put four inches on the front, and i've already got the add-a-leaf on the rear. shakle extension? or add a overload spring? or replace whole spring pack with dakota or s-10 pack?
Reply
Old Jun 15, 2009 | 09:48 PM
  #2  
Metmknice's Avatar
CF Veteran
 
Joined: Oct 2008
Posts: 2,127
Likes: 2
From: Hell, CA
Year: 1989
Model: Cherokee
Engine: 4.0L I6
Default

I would suggest getting rid of that AAL, and go with a bastard pack/lift shacle, and/or a shackle relocation kit.
Reply
Old Jun 15, 2009 | 09:51 PM
  #3  
BlueXJ's Avatar
Renix Super Guru
 
Joined: Mar 2008
Posts: 24,653
Likes: 19
From: In yourz postez fissin jurr spelinzs
Year: 1990XJ/1989MJ
Model: Comanche
Engine: 4.0L Renix
Default

Full leaf pack would be the best but not the cheapest route.
Reply
Old Jun 15, 2009 | 10:00 PM
  #4  
mobilecherokee4's Avatar
CF Veteran
 
Joined: Apr 2009
Posts: 1,696
Likes: 1
Year: 1999
Model: Cherokee
Engine: 4.0L I6
Default

just buils a bastard pack
Reply
Old Jun 15, 2009 | 10:13 PM
  #5  
river_runner81's Avatar
Thread Starter
Newbie
 
Joined: Apr 2009
Posts: 20
Likes: 0
From: Putnam, Oklahoma
Year: 1990
Model: Cherokee
Engine: 4.0L
Default

from google, looks like the s-10 bastard pack is the way to go. most reviews say it gives 2 inches.
Reply
Old Jun 16, 2009 | 06:52 AM
  #6  
Drewdertuder's Avatar
Senior Member
 
Joined: Sep 2008
Posts: 885
Likes: 0
From: Ga
Year: 1991
Model: Cherokee
Engine: 4.0 inline 6
Default

i got 3.5 to 4inches. here this is what bluexj showed me http://www.lunghd.com/Tech_Articles/...get_Lift.htm.i used s-10 leaves and cut of the eyes and attatched all of them minus the short one on the bottom.
Reply
Old Jun 16, 2009 | 06:53 AM
  #7  
Drewdertuder's Avatar
Senior Member
 
Joined: Sep 2008
Posts: 885
Likes: 0
From: Ga
Year: 1991
Model: Cherokee
Engine: 4.0 inline 6
Default

lets try again http://www.lunghd.com/Tech_Articles/...udget_Lift.htm
Reply
Old Jun 16, 2009 | 08:09 AM
  #8  
caged's Avatar
CF Veteran
 
Joined: Nov 2008
Posts: 7,874
Likes: 100
From: Northern Ontario, Canada
Year: 1990, 1999, 2000
Model: Cherokee
Engine: 4.0
Default

i've done both the s-10 and dakota bastard packs for friends.

the dakota got us about 4.5 and the s-10 got about 5.

as said, just cut the eyelets off the donor springs, insert whole pack less the lower one in between the main and second leaf of you xj pack.

use new center pin and u-bolts, and that's it.

extend your rear brakelines, possibly bump stops and whatnot...


this is a used 4.5 inch RE kit with dakota bastard pack on 33's before trimming.
Attached Images   
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
John T
Modified XJ Cherokee Tech
28
Mar 5, 2023 10:18 AM
Sandyman
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
Sep 10, 2015 09:21 AM
RedStar
Modified XJ Cherokee Tech
10
Sep 9, 2015 12:45 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 06:05 AM.