90CherokeeLimited

my 90 Cherokee's shifter seems to be stuck in park but when the key is set on the "ON POSITION' it works freely and smooth. But when you try and shift when the car is on it wont move. Having the mechanism open you can see a cable tightens up as you change from on position to when you try and start the jeep. Anyone else have this problem plz help!!!

ebelizard

Had a similar problem with a chevy blazer....tranny was blown so it wouldnt shift into any gear. Hope this isnt the problem, but best of luck to you

90CherokeeLimited

I'm thinking its more with a small rod that attaches to the ignition, it shifts fine and does go into gear just hangs up on something.

XJ Stryker

I cannot comment if that is your problem or not. But I can comment on the ease of replacing the ignition switch, which is what the rod connects too. It is on top of the steering column. Pretty easy to remove and inspect to see if you are having problems with the rod. Remove lowest portion of dash. Then remove the bolts that hold the steering column up. And then it is visible.

If you are worred about that being the problem then take a look at it. Like I said it is pretty easy to inspect prolly take 30 minutes to do.

4jeepers

I have to agree and also add that the ignition switch is a cheap part. I would just replace the switch!

90CherokeeLimited

oh ok yeah i will give it a try i had the dash out but need to take off the steering column like you said thanks alot for posting :P

XJ4MEPLZ

try starting in neutral then go into gear