Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here XJ (84-01)
All OEM related XJ specific tech. Examples, no start, general maintenance or anything that's stock.

4x4 or not?

Thread Tools
 
Search this Thread
 
Old Jun 25, 2010 | 07:33 PM
  #1  
UnExpected's Avatar
Thread Starter
Newbie
 
Joined: Jun 2010
Posts: 11
Likes: 0
Model: Cherokee
Default 4x4 or not?

Hey guys, first post. Gotta say, out of the cherokee sites i've looked through ya'll have probably one of the best. I searched around the forum for a similar topic or an answer but couldn't really find one. I've been underneath my automatic, 97 cherokee sport and it seems to have all the necessities for 4wd, the body says 4x4 on the back, but I have no controls (high/low 4wd shift *** or bottons) like I have on my CJ. My question is, did jeep make an AWD or computer controlled 4wd cause it seems like whenever i gun the accelerator the power goes to my rear axel. Any ideas or things to look for to see if the truck is actually 4x4 would be great. Thanks in advanced!
Reply
Old Jun 25, 2010 | 07:35 PM
  #2  
91familyxj's Avatar
CF Veteran
 
Joined: Aug 2009
Posts: 1,263
Likes: 0
From: Las Vegas
Year: 1996 Limited
Model: Grand Cherokee
Engine: 5.2
Default

Do you have an axle up front and a T case?
Reply
Old Jun 25, 2010 | 07:37 PM
  #3  
xj_maniac_newb's Avatar
CF Veteran
 
Joined: Sep 2009
Posts: 6,322
Likes: 6
From: Summerville, Ga
Year: 1995
Model: Cherokee
Engine: 2.5 4 cyl.
Default

is this a cherokee or a grand cherokee? if it is a cherokee (xj) than no, if its a grand cherokee (zj) than yes.
Reply
Old Jun 25, 2010 | 07:45 PM
  #4  
UnExpected's Avatar
Thread Starter
Newbie
 
Joined: Jun 2010
Posts: 11
Likes: 0
Model: Cherokee
Default

Yes, I have a tcase and front axel, and it's an xj. I'm pretty much stumped, i don't know why I would have the parts but no controls.
Reply
Old Jun 25, 2010 | 08:06 PM
  #5  
mike albo's Avatar
CF Veteran
 
Joined: Mar 2009
Posts: 8,712
Likes: 2
From: Loomis,California
Year: 1987
Model: Cherokee
Engine: 242 inline six
Default

post some pics so we can see it
Reply
Old Jun 25, 2010 | 08:34 PM
  #6  
capndoodles's Avatar
Senior Member
 
Joined: Jun 2009
Posts: 540
Likes: 0
From: SW Colorado
Year: 1998
Model: Cherokee
Engine: 4.0 6cyl
Default

Originally Posted by mike albo
post some pics so we can see it
x2 it would be helpful to see this
Reply
Old Jun 25, 2010 | 09:08 PM
  #7  
truckntractorhick's Avatar
CF Veteran
 
Joined: Dec 2009
Posts: 2,091
Likes: 1
From: Harleysville, PA
Year: 1998
Model: Cherokee
Engine: 4.0L I6 Powertech
Default

yea pics!
Reply
Old Jun 25, 2010 | 09:17 PM
  #8  
jmm0122's Avatar
Registered Users
 
Joined: Dec 2009
Posts: 2,660
Likes: 2
Default

x4 on the pics. Thats quite odd.
Reply
Old Jun 25, 2010 | 09:23 PM
  #9  
mike albo's Avatar
CF Veteran
 
Joined: Mar 2009
Posts: 8,712
Likes: 2
From: Loomis,California
Year: 1987
Model: Cherokee
Engine: 242 inline six
Default

unless it an unfinished conversion somebody started
Reply
Old Jun 25, 2010 | 09:32 PM
  #10  
jmm0122's Avatar
Registered Users
 
Joined: Dec 2009
Posts: 2,660
Likes: 2
Default

Originally Posted by mike albo
unless it an unfinished conversion somebody started
Very true, and a good possibility.
Reply
Old Jun 25, 2010 | 11:48 PM
  #11  
spittinimage's Avatar
Member
 
Joined: Mar 2010
Posts: 154
Likes: 0
From: Emmett, Idaho
Year: 96
Model: Cherokee
Engine: 4.0L
Default

gotta see some pics am very curious.
Reply
Old Jun 26, 2010 | 12:05 AM
  #12  
Walter's Avatar
Seasoned Member
 
Joined: Feb 2010
Posts: 254
Likes: 0
From: Co
Year: 1993
Model: Cherokee
Engine: I6
Default

Could it be that it's a 4x4 and some one took off the shift levers and put in the different center consul. Shot my idea down if it's dumb just popped into my head
Reply
Old Jun 26, 2010 | 01:53 AM
  #13  
trans_am7935's Avatar
CF Veteran
 
Joined: May 2009
Posts: 1,844
Likes: 4
From: Glen Burnie, MD
Year: 1994
Model: Cherokee
Engine: 4.0 H.O. K&N, Borla headers, custom down pipe, magnaflow hi-flo cat, flowmaster to turn down tip
Default

Originally Posted by mike albo
unless it an unfinished conversion somebody started
now that is a smart man right there. i agree with this guy
Reply
Old Jun 26, 2010 | 08:17 AM
  #14  
CAEMI's Avatar
Senior Member
 
Joined: May 2010
Posts: 889
Likes: 2
From: Detroit, MI
Year: 1994
Model: Cherokee
Engine: 4.0
Default

Originally Posted by UnExpected
Yes, I have a tcase and front axel, and it's an xj. I'm pretty much stumped, i don't know why I would have the parts but no controls.

1. Does the stuff look like it's been there forever or just bolted in?

2. Go underneath and look for the linkage - cables, brackets, etc. Shine a flashlight up into the transmission tunnel and see whats to be seen.

It's got to be a console with a floor shift for the automatic trans. The transfer case shifter is right next to it on the left. If there is a hole in the trans tunnel and no shifter, maybe somebody had problems with it and removed it.

I've got an '87 Wrangler project that they DPO blew the motor in and installed a 305 SBC and TH350 with a driveshaft to the rear axle and eliminated the tcase because he could not find a TH350 out of a 4x4. People do weird stuff.
Reply
Old Jun 26, 2010 | 09:47 AM
  #15  
xj_maniac_newb's Avatar
CF Veteran
 
Joined: Sep 2009
Posts: 6,322
Likes: 6
From: Summerville, Ga
Year: 1995
Model: Cherokee
Engine: 2.5 4 cyl.
Default

maybe they threw in a zj tcase and tranny? if that can even be done.....

and x56 on the pics
Reply



All times are GMT -5. The time now is 07:09 AM.