Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here XJ (84-01)
All OEM related XJ specific tech. Examples, no start, general maintenance or anything that's stock.

4wd swap

Thread Tools
 
Search this Thread
 
Old Feb 4, 2009 | 12:20 AM
  #1  
snowboard3r411's Avatar
Thread Starter
Seasoned Member
 
Joined: Jan 2009
Posts: 487
Likes: 0
From: Palisade Colorado
Year: 1998
Model: Cherokee
Engine: 4.0
Default 4wd swap

who has done a 4wd swap on a 2wd im trying to find me a 2 dr 5 spd cherokee and found a nice 2wd one. is this pretty much a bolt on thing? a t case dive shaft and front axle?
Reply
Old Feb 4, 2009 | 12:42 AM
  #2  
BlueXJ's Avatar
Renix Super Guru
 
Joined: Mar 2008
Posts: 24,653
Likes: 19
From: In yourz postez fissin jurr spelinzs
Year: 1990XJ/1989MJ
Model: Comanche
Engine: 4.0L Renix
Default

And transmission and console with levers and linkage. Yeah pretty much bolt on, but the years must also match.
Reply
Old Feb 7, 2009 | 12:18 AM
  #3  
snowboard3r411's Avatar
Thread Starter
Seasoned Member
 
Joined: Jan 2009
Posts: 487
Likes: 0
From: Palisade Colorado
Year: 1998
Model: Cherokee
Engine: 4.0
Exclamation

Originally Posted by BlueXJ
And transmission and console with levers and linkage. Yeah pretty much bolt on, but the years must also match.
Why a trans?
Reply
Old Feb 7, 2009 | 12:22 AM
  #4  
BuckB91XJ's Avatar
CF Veteran
 
Joined: Nov 2008
Posts: 6,989
Likes: 4
From: Oak Harbor, WA.
Year: 1987
Model: Cherokee
Engine: 4.0 liter RENIX I-6, DIY Cold Air Intake, 2.5 FM Exhaust, 3 Core Radiator
Default

Because the tail housing and output shaft on your 2WD Jeep will not bolt up to the transfer Case. You must have a tranny for a 4WD.
Reply
Old Feb 7, 2009 | 05:27 PM
  #5  
snowboard3r411's Avatar
Thread Starter
Seasoned Member
 
Joined: Jan 2009
Posts: 487
Likes: 0
From: Palisade Colorado
Year: 1998
Model: Cherokee
Engine: 4.0
Default

Originally Posted by BuckB91XJ
Because the tail housing and output shaft on your 2WD Jeep will not bolt up to the transfer Case. You must have a tranny for a 4WD.
well that sucks sounds like its not worth it is everything pretty much bolt on?
Reply
Old Feb 7, 2009 | 05:29 PM
  #6  
okcjeeper's Avatar
::CF Administrator::
 
Joined: May 2008
Posts: 10,039
Likes: 16
From: Okc area
Year: 1991
Model: Cherokee
Engine: 4.0 I6
Default

If you can find a cheap donor you could easily do it..Although if you can find a 4wd XJ I would go that route first.
Reply
Old Feb 8, 2009 | 12:44 AM
  #7  
snowboard3r411's Avatar
Thread Starter
Seasoned Member
 
Joined: Jan 2009
Posts: 487
Likes: 0
From: Palisade Colorado
Year: 1998
Model: Cherokee
Engine: 4.0
Angry

Originally Posted by okcjeeper
If you can find a cheap donor you could easily do it..Although if you can find a 4wd XJ I would go that route first.
This true but its freaking hard so find a clean 97 and up 2 door with the 5 speed ugh
Reply
Old Feb 8, 2009 | 10:23 AM
  #8  
zjrog's Avatar
Senior Member
 
Joined: Nov 2008
Posts: 587
Likes: 1
From: Tooele, UT
Year: 1995
Model: Grand Cherokee
Engine: 4.0
Default

I would say that if you have to ask, you might not be willing to put in the effort needed. I know I would be able to do it, but not sure I would want to. But then again, I'm getting ready to fab a D30 under a Ford Ranger... I got a parts XJ for free, but see running XJs for $300 and up. If you just need one for parts to make a 2WD one 4WD, then get the 2WD you want, and collect parts till you have EVERYTHING you need. But be prepared for a ton of work.
Reply
Old Feb 8, 2009 | 05:45 PM
  #9  
snowboard3r411's Avatar
Thread Starter
Seasoned Member
 
Joined: Jan 2009
Posts: 487
Likes: 0
From: Palisade Colorado
Year: 1998
Model: Cherokee
Engine: 4.0
Default

Originally Posted by zjrog
I would say that if you have to ask, you might not be willing to put in the effort needed. I know I would be able to do it, but not sure I would want to. But then again, I'm getting ready to fab a D30 under a Ford Ranger... I got a parts XJ for free, but see running XJs for $300 and up. If you just need one for parts to make a 2WD one 4WD, then get the 2WD you want, and collect parts till you have EVERYTHING you need. But be prepared for a ton of work.
i know i could do the work im in the same boat you are its if i really want to ha im just going to wate till i get that dam 2door 5 spd with 4wd
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
t.mcginley.jr
Jeep Builds
105
Jan 31, 2024 04:58 PM
ROCKRIDGE 4WD
Vendor Showcase
2
Sep 23, 2015 07:02 PM
xltom
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
9
Sep 19, 2015 01:37 PM
Mmll52
Modified XJ Cherokee Tech
8
Sep 17, 2015 05:11 PM
Joey95XJ
Introductions
3
Sep 14, 2015 03:16 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 07:01 AM.