My 4wd light is out on my 2000 cherokee 4.0 v6, is there a fuse or relay they sell for this? The diagrams i have read doesn't display a fuse for it? Could this be a relay? any help mike

 

burnt bulb maybe?

 

Use the search bar. It helps alot.

Here, this is how I found the problem with my 98.

https://www.cherokeeforum.com/f51/fi...t-np231-37548/

 

u realized u said 4.0 v6 right?

 

lol yea im not to smart haha

 

it's likely the switch on top of the transfer case - happened to me also

 

if it is the switch is there a problem if it is not working? like does it only turn that light on or does it do something else as well?

sorry to thread jack but its along the same topic

 

Its just a light, you dont really need it anyway.
If its anything like a 96 you can pull the 2 pin plug off the top of the tcase and jump the pins together. Turn the key on, and if the bulb is good the light will be on. This will show you if the switch is bad.

If you jump the wires and nothing happens, you either have a bad bulb or a cut wire somewhere.

No relays, its a simple 2wire circuit.

 

thanks guys for the help i relize now its gotta be the sensor. The 4wd drive works fine as does part time just no indictaor lights to show they are on. Must be the sensor, now i have to go find it, i know its by the transfer case, is it easy to locate?

 

Read my post above with the link and its a walk through to finding and diagnosing the switch.

 

very helpfull xxxj99xx thanks

 

Anytime.