4.0 squeal?
Thread Starter
Seasoned Member
Joined: Dec 2008
Posts: 286
Likes: 0
Year: 2000
Model: Cherokee
Engine: 4.0 I6 HO
ok i just picked up a comanche today and it squeals really loud no matter if its at idle or driving. i was told its the serpentine belt and that it was loose. if so, how do i tighten it cause i have no clue.
CF Veteran
Joined: Jul 2009
Posts: 2,522
Likes: 0
From: New Jersey
Year: 2000
Model: Cherokee
Engine: l6 HO
look for the power steering pump..you will find 2 bolts i believe.. loosen them up and then tighten the pulley below then tighten those 2 bolts back up on the power steering assembly... if its like my xj you will need to clean all your pulleys.. and spend the money and get the best belt.. mine hasnt squeked since.. gator belts ftw
You'll need to loosen, not remove, the bolt that holds the pulley in place...it faces forward toward the radiator near the power steering pump. After it is loose, you'll need to locate the adjusting bolt which is near the pulley but faces up toward the hood. Crank on that bolt clockwise to move the pulley up, in which case, it tightens the belt. Don't forget to tighten the front pulley bolt when done.
Thread
Thread Starter
Forum
Replies
Last Post
CherokeeHoonigan
Modified XJ Cherokee Tech
89
Jul 4, 2023 02:20 PM
NM-XJ
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
18
Oct 23, 2018 04:21 PM
golden210
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
6
Sep 23, 2015 04:07 AM
carson
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
Sep 2, 2015 08:26 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



