4.0 to 4.0 HO swap
#16
Newbie
Join Date: Aug 2015
Location: Charleston West Virginia
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1989
Model: Cherokee
Engine: 4.0L
So I am putting a 96 block in my 89. I have read Cruisers Renix to HO. Is the reason for changing oil filter housing because the motor mount is in the way? And with 89 to 96 will motor mount right up to my transmission? AW-4 auto trans in both Jeeps. Help me please.? Thanks
Last edited by Daniel Loudin; 11-29-2015 at 11:05 AM. Reason: Misspelling
#17
::CF Moderator::
Join Date: Aug 2011
Location: Prescott, Az
Posts: 43,937
Received 1,540 Likes
on
1,247 Posts
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
You're good to go.
You can use either oil filter adapter as long as you use the filter designed for it.
You can use either oil filter adapter as long as you use the filter designed for it.
#20
::CF Moderator::
Join Date: Aug 2011
Location: Prescott, Az
Posts: 43,937
Received 1,540 Likes
on
1,247 Posts
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
#21
Newbie
Join Date: Aug 2015
Location: Charleston West Virginia
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1989
Model: Cherokee
Engine: 4.0L
Crusier. Sorry i havent gotten back i lost my login info. Motor swap went smooth and Jeep is running great. Thank you so much!! Now Im working on swapping front and rear axles. Donor is still 96 cherokee. I cant find any info on here i have trouble when searching. Can you help
#22
::CF Moderator::
Join Date: Aug 2011
Location: Prescott, Az
Posts: 43,937
Received 1,540 Likes
on
1,247 Posts
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
Crusier. Sorry i havent gotten back i lost my login info. Motor swap went smooth and Jeep is running great. Thank you so much!! Now Im working on swapping front and rear axles. Donor is still 96 cherokee. I cant find any info on here i have trouble when searching. Can you help
What are your concerns on the axle swaps?
#23
Newbie
Join Date: Aug 2015
Location: Charleston West Virginia
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1989
Model: Cherokee
Engine: 4.0L
My main concerns are what needs to be used from 89 and vica versa. Also would i be better off going posi-lock on front or just upgrading? Im looking to build low cog type setup not sure if that matters. Will run 3in lift with 33x12x50. As of now gearing is still stock 3.55 and i was thinking of 3.73?!.. Just on a budget and concerned about putting funds in the right places. I have axles but both need new brakes ect.. Thank you for the help!!
#24
::CF Moderator::
Join Date: Aug 2011
Location: Prescott, Az
Posts: 43,937
Received 1,540 Likes
on
1,247 Posts
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
#26
Newbie
Join Date: Aug 2015
Location: Charleston West Virginia
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1989
Model: Cherokee
Engine: 4.0L
read that thread and i done this. Engaged 4wd then back to 2wd. Drove off and heard a loud pop and now my front wont engage. Thats what got me thinking of swapping. Sorry i should have said that first.
#27
::CF Moderator::
Join Date: Aug 2011
Location: Prescott, Az
Posts: 43,937
Received 1,540 Likes
on
1,247 Posts
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
Inspect the shift fork then.
#30
Member
Join Date: Feb 2014
Location: Ontario
Posts: 182
Likes: 0
Received 3 Likes
on
2 Posts
Year: 1989
Model: Cherokee
Engine: 4.0L inline 6
I am planning to part out my 1996 To use on my 1989
1996 has 8.25 axle and D30 without the disconnect.
1989 has D35 and D30
Question, will the brakes be the same? no ABS.
Engine sounds like a piece of cake for fit.
Will the 1996 water pump be able to be used in the 1989? All other accessories are new in the 1989. and,
Will the A/C bypass pulley in the 1989 work to eliminate the A/C on the 1996 engine?
1996 has 8.25 axle and D30 without the disconnect.
1989 has D35 and D30
Question, will the brakes be the same? no ABS.
Engine sounds like a piece of cake for fit.
Will the 1996 water pump be able to be used in the 1989? All other accessories are new in the 1989. and,
Will the A/C bypass pulley in the 1989 work to eliminate the A/C on the 1996 engine?