33s and 4.56 on Dana 30?
Does anyone have experience running this combo? I wanna build a rock crawler xj, but wanna find out what axles to get so i can do it right that first time
. I'm already getting an 8.8 for the rear
. I'm already getting an 8.8 for the rear
CF Veteran
Joined: Feb 2010
Posts: 2,095
Likes: 3
From: Cove, OR
Year: 1993
Model: Cherokee
Engine: 4.0
The gears are good for light crawling with an automatic and an open or LSD front. If you will be crawling bigger stuff or using a manual, you'll need to go lower, 5.13 range, or a tera flex 4.1 transfer case gear set, or better yet both. You would also need to go to alloy 30 spline shafts, or plan on carrying spare shafts and changing them often, and weld on a axle truss to keep the light duty 30 from flexing, or just get a high pinion Dana 44.
Trending Topics
Senior Member
Joined: Feb 2010
Posts: 938
Likes: 1
From: Alto, MI
Year: 2002
Model: Grand Cherokee
Engine: 4.7
not to thread-jack, but if you plan on putting a 44 up front, i recommend doing that to the rear also. or maybe even 60s. really depends on hard you plan on wheeling. i run 35s on stock axles, do many trails rated double black diamond, and do just fine. i just use very little skinny pedal.
CF Veteran
Joined: Feb 2010
Posts: 2,095
Likes: 3
From: Cove, OR
Year: 1993
Model: Cherokee
Engine: 4.0
You will need a Hi pinion driver side drop Dana 44, and I haven't been looking for one so I don't know where you could find one or in what they come in stock. So I guess it is time for you to do some research.
Last edited by Rock Toy; Oct 28, 2010 at 04:08 PM.
Senior Member
Joined: May 2010
Posts: 745
Likes: 1
From: Here, There, Everywhere
Year: 1997
Model: Grand Cherokee
Engine: 5.2
didnt they come with the early xj 4 bangers? and i thought they came with 4.10s also.
CF Veteran
Joined: Feb 2010
Posts: 2,095
Likes: 3
From: Cove, OR
Year: 1993
Model: Cherokee
Engine: 4.0
Early broncos and scouts so good luck with that. Full with is way eazyer to come by. Mid 60 to mid 70 f series pickups. But with only running 33s I would stick with the d30 more then enuf. I would get one from a 97-99. More beef in the joints and still high pinon.


