I've made a rookie mistake. It was more or less unavoidable, but I've taken this rebuild to extreme lengths. And now I don't know what goes where. Ya ya I know, pictures of everything. But that isn't really helping me.
I've moved houses 3 times since I started this and my twins were born last February.. nicu to picu in the first 2 months. Ive been way too busy working a ton of hours to support my family and i dont need negative comments. I know ive screwed the pooch. But im sticking to my roots and i AM going to finish this hog.

Does anyone have a link or info on bolt locations for pretty much everything from the firewall forward for an engine install? I have the connectors labeled so I'm not worried about them. I have the engine installed (motor mount bolts) but that's it. I was hoping to find at least some pictures and locations of bolts for the rest. I do remember the 8 point torx on top of the tranny, but not really anything else. The cheap steering pump triangle bracket has also broken on me, and the bolt broke in the pump. Also a bolt broke off in the ac compressor bracket. I'm just having a hell of a time with this. And it began March of 2012.... ugh.

Any help with anything really helps.

 

"bolt locations for pretty much everything from the firewall forward".

Pretty heavy demand there bud. If you had a Factory Service Manual and parts catalog for you Jeep it would help you big time.

Or you could start at the firewall and stop at the first item you cannot figure out what fastener it needs, take a photo of it, then post it here. Someone will be right along to help you.

 

Not sure whether this will help but you could try looking at the diagrams here;


http://www.chryslerpartsdirect.com/


Just a suggestion!