2 SYE Questions,
#1
Newbie
Thread Starter
Join Date: Jun 2009
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
2 SYE Questions,
Im a little confused here about a few things related to a SYE I have spent a few days searching threads and after all the reading I did I'm a little split on which way to go, but for sure Im trying to go cheapest
First, Do I need to shim the rear axle, I do see this mentioned a few place but seems a lot of post about SYE don't mention it and they are saying there Vibs are gone with a HnT,
Second, I do see about using a Flange and part number 211229x but have thought about saving money and just using a yoke which I did find one write up on..
Thanks for any help
First, Do I need to shim the rear axle, I do see this mentioned a few place but seems a lot of post about SYE don't mention it and they are saying there Vibs are gone with a HnT,
Second, I do see about using a Flange and part number 211229x but have thought about saving money and just using a yoke which I did find one write up on..
Thanks for any help
Last edited by Rickgmi; 11-21-2009 at 11:18 AM.
#2
Banned
Join Date: Apr 2009
Location: Mt.Airy NC
Posts: 599
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0
Just save your money for a SYE and use a front drive shaft for your rear and that well same you some money, look for used ones to, I picked one for $100 with half the case
#4
Senior Member
Join Date: Apr 2009
Location: Ontario
Posts: 522
Likes: 0
Received 0 Likes
on
0 Posts
Year: 98' and 99'
Model: Cherokee
Engine: 4.0
well the way i look at it, RE Hack N tap 100+ shipping
Flange Adapter 70-80$
So your looking at like 200$ for Hack N tap
Maybe you can find some cheaper, but your almost paying the same amount
Flange Adapter 70-80$
So your looking at like 200$ for Hack N tap
Maybe you can find some cheaper, but your almost paying the same amount
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)