Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here XJ (84-01)
All OEM related XJ specific tech. Examples, no start, general maintenance or anything that's stock.

1996 XJ Parts numbers conflict

Thread Tools
 
Search this Thread
 
Old Sep 18, 2020 | 06:27 PM
  #1  
Slinky's Avatar
Thread Starter
Newbie
 
Joined: Sep 2020
Posts: 8
Likes: 1
From: South Africa
Year: 1996
Model: Grand Cherokee (ZJ)
Engine: 4.0
Default 1996 XJ Parts numbers conflict

Recently bought a 1996 Jeep Grand Cherokee Limited, 4.0 Straight 6 A/T =RIGHT HAND DRIVE=
I knew the old girl had a few issues, but got it from a friend, who is the original owner, Car has sat unused for a few years.
Full service done, coil packs replaced, new ignition leads etc, she starts and runs great, but after 20 mins or so of driving, starts to lose power and splutter
Headlights and dash lights increase and decrease in brightness randomly, and a few other "electrical' issues.
After another visit to mechanic and then auto electrician, I am told I need to replace the body control module - problem - I cannot get a new, recon or even second hand part in South Africa
I have no problem getting the part shipped from the USA, but, Jeep South Africa says the part number is: 5602 8311. All the part numbers I find searching online differ, and I am loath to pay good money to ship the incorrect parts around the world.
If somebody could give me some clarity on this parts number issue (and suggest a good parts supplier who will ship internationally) I would be most grateful

Many thanks
Steve
Reply
Old Sep 18, 2020 | 06:38 PM
  #2  
awg's Avatar
awg
CF Veteran
5 Year Member
Liked
Loved
Community Favorite
 
Joined: Mar 2016
Posts: 3,816
Likes: 725
Year: 96
Model: Cherokee (XJ)
Engine: 4.0
Default

1) You are posting in the XJ section, not the ZJ section...as far as I know, a '96 XJ do not have "body modules"

2) You have RHD (like me)..while you get a lot of help on this USA based forum, my observation is not much knowledge is available on RHD specific issues

3) If you have no luck, you may wish to join the Oz Jeep forum, as their is so many RHD owners

4) I forsee a "used" part being needed..hence point 3
Reply
Old Sep 18, 2020 | 06:47 PM
  #3  
Slinky's Avatar
Thread Starter
Newbie
 
Joined: Sep 2020
Posts: 8
Likes: 1
From: South Africa
Year: 1996
Model: Grand Cherokee (ZJ)
Engine: 4.0
Default

New to Jeeps in general, so going on what the mechanic who worked on the car told me, and he said it was an XJ.
Will post a pic when the sun comes up - it's 2 am here
I have read that some models have no BCM
Would Vin number help clarify this?
Reply
Old Sep 18, 2020 | 07:37 PM
  #4  
awg's Avatar
awg
CF Veteran
5 Year Member
Liked
Loved
Community Favorite
 
Joined: Mar 2016
Posts: 3,816
Likes: 725
Year: 96
Model: Cherokee (XJ)
Engine: 4.0
Default

Originally Posted by Slinky
Recently bought a 1996 Jeep Grand Cherokee Limited, 4.0 Straight 6 A/T =RIGHT HAND DRIVE=
Many thanks
Steve
If it has a coil sprung rear suspension it is a ZJ = Grand Cherokee

If it has a rear leaf suspension, it is a plain old Cherokee = XJ

There are many other differences...and similarities

Reply
Old Sep 18, 2020 | 08:22 PM
  #5  
Saudade's Avatar
CF Veteran
5 Year Member
Veteran: Air Force
Community Favorite
 
Joined: Aug 2020
Posts: 2,153
Likes: 585
From: SoCal
Year: 1988
Model: Cherokee (XJ)
Engine: 4.0L
Default

When searching on part numbers, remove the space. So 5602 8311 becomes 56028311. This part number comes up as:

94-95 Jeep Grand Cherokee Engine Computer Module 4.0L 6 CYL ECM PCM 56028311 ZJ

https://www.jeepsunlimited.net/94_95...cm_56028311_zj

Not sure it you can view this site from SA.
Reply
Old Sep 18, 2020 | 11:00 PM
  #6  
lawsoncl's Avatar
CF Veteran
5 Year Member
Liked
Loved
Community Favorite
 
Joined: Dec 2017
Posts: 4,367
Likes: 1,215
Year: 1989
Model: Comanche (MJ)
Engine: 4.0
Default

I'd start by finding and cleaning all of the grounds and connectors you can access. I think that's more likely your problem than replacing the body computer, which won't affect how the engine is running.
Reply
Old Sep 30, 2020 | 06:52 PM
  #7  
Slinky's Avatar
Thread Starter
Newbie
 
Joined: Sep 2020
Posts: 8
Likes: 1
From: South Africa
Year: 1996
Model: Grand Cherokee (ZJ)
Engine: 4.0
Default

Thanks for the info, so, guess the mechanic doesn't know his elbow from his ***. Its a ZJ. will post in correct section
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
mwritter
Wanted
4
Sep 19, 2020 08:54 AM
Jswarts
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
6
Apr 3, 2020 02:26 PM
ZacharyA7X
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
4
Jun 24, 2016 02:27 PM
wjnfirearms
Cherokee Chat
14
Jul 17, 2012 09:01 AM
Shelby
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
Mar 11, 2012 10:55 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 06:49 AM.