1996 master control power window and lock switch

Reply Subscribe

Thread Tools

Search this Thread

Mar 20, 2011 | 11:30 AM

#16

freegdr

CF Veteran

Joined: Mar 2010

Posts: 47,923

Likes: 38

From: Broward County Fl.

Year: 1989 xj sport 2dr

Model: Cherokee

Engine: 12 hole bosch Injectors

Quote:

Originally Posted by OconeeCherokee

thats the first plate, then there is the paper spacer, then another plate.
where are you finding these diagrams? I searched google with every key word i could think of and decided to join the forum. I have so many other questions other than this window but, one thing at a time.

i found this on the other question you asked about this on here ask the member who posted it

Mar 20, 2011 | 11:32 AM

#17

freegdr

CF Veteran

Joined: Mar 2010

Posts: 47,923

Likes: 38

From: Broward County Fl.

Year: 1989 xj sport 2dr

Model: Cherokee

Engine: 12 hole bosch Injectors

is there no wear pattern on the paper to helpwith other plate

Mar 20, 2011 | 11:34 AM

#18

freegdr

CF Veteran

Joined: Mar 2010

Posts: 47,923

Likes: 38

From: Broward County Fl.

Year: 1989 xj sport 2dr

Model: Cherokee

Engine: 12 hole bosch Injectors

Quote:

Originally Posted by freegdr

isee the one plate gos

look to me the paper is under this plate

Attached Thumbnails

1996 master control power window and lock switch-img_0862.jpg

Attached Images

Last edited by freegdr; Mar 20, 2011 at 11:37 AM.

Mar 20, 2011 | 11:36 AM

#19

OconeeCherokee

Thread Starter

Junior Member

Joined: Mar 2011

Posts: 94

Likes: 1

From: Oconee

Year: 1996

Model: Cherokee

Engine: 4.0

yea the first plate goes over the pins, then the paper, then the second plate

Mar 20, 2011 | 11:37 AM

#20

OconeeCherokee

Thread Starter

Junior Member

Joined: Mar 2011

Posts: 94

Likes: 1

From: Oconee

Year: 1996

Model: Cherokee

Engine: 4.0

yea the wear pattern helps, and now i know the direction of switch doesnt matter, so maybe i just dont have it pushed down enough

Mar 20, 2011 | 02:07 PM

#21

OconeeCherokee

Thread Starter

Junior Member

Joined: Mar 2011

Posts: 94

Likes: 1

From: Oconee

Year: 1996

Model: Cherokee

Engine: 4.0

Got the windows working like they were, (all working except drivers) and now that I know switches are good, fuses are fine, motor and regulator work, the problem has got to be within the harness. Should I pull it from the door, cut the electrical tape and look for wear? I think the drivers wires are light blue and a tan or brown, would any other specific wires be of interest in the harness to check? Thanks for all the help, the previous posts by members have been priceless.

OconeeCherokee

Mar 20, 2011 | 02:16 PM

#22

freegdr

CF Veteran

Joined: Mar 2010

Posts: 47,923

Likes: 38

From: Broward County Fl.

Year: 1989 xj sport 2dr

Model: Cherokee

Engine: 12 hole bosch Injectors

your sure the motor in drivers door is good

Mar 20, 2011 | 02:36 PM

#23

freegdr

CF Veteran

Joined: Mar 2010

Posts: 47,923

Likes: 38

From: Broward County Fl.

Year: 1989 xj sport 2dr

Model: Cherokee

Engine: 12 hole bosch Injectors

lt blu is down yellow is up in the wiring colors,also check to make sure power is present on the board at that switch

Mar 20, 2011 | 03:38 PM

#24

OconeeCherokee

Thread Starter

Junior Member

Joined: Mar 2011

Posts: 94

Likes: 1

From: Oconee

Year: 1996

Model: Cherokee

Engine: 4.0

the motor worked when i plugged it into the other door, so i know it's good. Fuses are good since other windows worked. Switches are all good. Just pull the harness out and stripped it down. It's the blue and the white wires that go to the drivers window motor and both of them were completely severed. Spliced and taped, now the drivers window motor is working, just have to reassemble.