Mitchell22

I'm in the process of replacing the fuel tank on my Cherokee, it was leaking due to some corrosion in the seems. I was going to remove the electrical connectors for the pump and fuel gauge to get better access to the mounting plate but thought better of it, and have treated all the rust with everything in situ. My problem is that I had already removed the spade connectors that come from the pump and fuel gaue sender. Of course I forgot to take adequate notes before I started! None of the diagrams I found show the application for my Cherokee. There is only one fuel pipe, and two electrical connectors entering the tank. My question is, which wires should be connected where to make sure I don't have to remove the pump once the tank is back in the car!

thanks.