Ungreat

I drive two xjs one is a 1992 I got off cl for $40o the guy hit a wall the driver side lower control arm was smashed in not drivable so I fix it drove it home just fine for weeks then one day I drove done the from the west hills of Portland my breaks glazed over they turned to mush and were smoking. So I replace break system pads rotors and so on first time on road again I didn't get a mile down the road and bam wobble like way bad wobble so I slow down they go away speed back up all good. The would come and go like the wind. it got so bad now I get wobbles all the time now. I think it's a wheel bearing or hub or all bushings in front end any ideas on that ????

Then I got a 89 off cl for $250 had to tow it home it was in pieces replace slave cylinder got it going. drove it for awhile then I flatten the cam motor swop now I feel the motor and trans wobble but if I hold the clutch in a little it's all good why is that is there a adjustment for the clutch maybe? Can any one help me

Ungreat

And it's not my driving

bloddy mud

yourgetting death wobbles in the first one you posted. Search bar will tell you everything to check and the 89... Tranny mount? Wait for someone to chime in.

Turbo X_J

"then I flatten the cam motor swop now I feel the motor and trans wobble"

First welcome to the site.
You'll have to explain at least the highlighted portion a little further if not your entire post. This is the interwebz, your best bet to finding a solution to your issues is communication.