1990 xj ABS swap to 2000 XJ Master Cylinder
03-23-2015, 12:46 PM
#1
Newbie
Thread Starter
Join Date: Mar 2015
Location: Sylmar CA
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1990
Model: Cherokee
Engine: 4.0
1990 xj ABS swap to 2000 XJ Master Cylinder
I just purchased a 90 xj with the crappy Bendix 9 ABS system. I decided to do the master cylinder conversion swap and I found a 2000 cherokee at my local junkyard. I pulled off the master cylinder, pump, and proportion valve. My question is if the brake lines are going to fit? I've read that I needed to replace the front lines and I could keep the same rear lines. Is this true? I contacted a jeep junkyard and the guy told me that he has the lines from a 1996. I know 96 - 01 are very similar, but since I have a 90, I'm wondering if the rear lines need to be replaced as well. Also if anyone else has done this conversion using similar parts off of a newer cherokee. Some of the post I've read talk about small modification that need to be done. I know I need to de-pressurized the system, but what about all the wires from the ABS system? Any info will help!
Thread
Thread Starter
Forum
Replies
Last Post
Travis88XJ
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
19
03-12-2016 07:26 AM
Ye Ol' Cherokee
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
10-09-2015 10:29 PM
WTT[NorAtl]: Looking for a cabover truck, 1980s through 1990s
Cherokee_Laredo
Wanted
0
09-02-2015 01:00 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)