1990 Cherokee sputters at throttle
my Jeep idles fine but the second you give it throttle it’ll sputter/Bog. I’ve replaced the upstream o2 and the intake gasket. Can’t find a vacuum leak. Not sure what to do.
Last edited by Johnnie Webb; Jan 15, 2018 at 01:26 PM. Reason: misspelt a word
CF Veteran
Joined: Nov 2017
Posts: 3,700
Likes: 238
From: Groton, MA
Year: 1995
Model: Cherokee(XJ)
Engine: I6 4.0L
You can check out cruiser's info pages that have a ton of great info on your Renix Jeep - www.cruiser54.com
I'd do that and check your TPS (outlined at the above site) and while you've got the hood open, clean and tighten all your grounds just for good measure (also outlined at the above site).
I'd do that and check your TPS (outlined at the above site) and while you've got the hood open, clean and tighten all your grounds just for good measure (also outlined at the above site).
CF Veteran
Joined: Jun 2010
Posts: 1,220
Likes: 5
From: Arkansas
Year: 1987 & 1996
Model: Cherokee
Engine: 4.0
get you multi-tester out check the Throttle Position sensor,
Also check your distributor is tight and indexed correctly for starter.
http://www.lunghd.com/Tech_Articles/...iagnostics.htm
Also check your distributor is tight and indexed correctly for starter.
http://www.lunghd.com/Tech_Articles/...iagnostics.htm
Thread
Thread Starter
Forum
Replies
Last Post
ThinkMilitant
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
6
Jul 2, 2009 04:12 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



