1990 after deep water stall, No start?
Junior Member
Joined: Mar 2010
Posts: 92
Likes: 0
From: Dallas,NC
Year: 1990
Model: Cherokee
Engine: 4.0
I had the same problem with mine the first time i got mine stuck in a creek down the road your starter if probly shot thats what was wrong with mine when i pulled mine off water came pourin out lol
Junior Member
Joined: Apr 2010
Posts: 81
Likes: 1
From: Grand Haven, MI
Year: 2001
Model: Cherokee
Engine: Stock
My buddy went into a water hole with his 91 Wrangler at about 40, and it stopped like we threw out a boat anchor. We towed home, and pulled the plugs. Upon cranking it shot water out of the cylinders. We sprayed the cylinders out with WD40 and let it sit overnight, and dried the plugs out. It fired right up in the morning.
We drained about 10 quarts of pea soup and gravel out of the oil pan. Flushed the crankcase and did about 3 or 4 oil changes in a row till it came out clean. No bent rods...Still runs 5 years later.
Hopefully yours is that easy. Good luck!
We drained about 10 quarts of pea soup and gravel out of the oil pan. Flushed the crankcase and did about 3 or 4 oil changes in a row till it came out clean. No bent rods...Still runs 5 years later.
Hopefully yours is that easy. Good luck!
Well i did hydro lock it, in 1 and 6 of the cylinders. Pumped it out sprayed it with WD, new spark plugs, new oil, and then i find out that my battery core also died on me
so a new battery here in a few days
so a new battery here in a few days
Last edited by the_mutt; Apr 19, 2010 at 11:59 PM.
CF Veteran
Joined: Jan 2010
Posts: 1,316
Likes: 1
From: Coeur d' Alene, Idaho
Year: 1998
Model: Cherokee
Engine: 4.0 rebuilt w/ bored TB, banks header, upgraded ignition, 3 row rad, high flow h2o pump, 180* t-stat
hey call me when you get up. ill drive out and drop my battery in and see if it'll start up. might wanna do another oil change too just to be safe...man wish i had a pic of the water squirtin outta the #1 cylinder and hittin you in the face HA HA
Alright, Update time. New battery, went to start it, and it's still not firing up. Just keeps cranking over, but it's seems like it wants to. Do any of you have any idea what may still be keeping it from starting?
Hey Update!!! It's running and starting!!!! I read on the forums that you can prime the cylinders by pushing the gas 5 times and she fired up rough and then leveled out!! now it's running pretty well but i know i should change the oil again, and I'm going to seafoam it
CF Veteran
Joined: Jan 2010
Posts: 1,316
Likes: 1
From: Coeur d' Alene, Idaho
Year: 1998
Model: Cherokee
Engine: 4.0 rebuilt w/ bored TB, banks header, upgraded ignition, 3 row rad, high flow h2o pump, 180* t-stat
Thread
Thread Starter
Forum
Replies
Last Post
Jose Calderon
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
17
Sep 17, 2015 08:57 PM
nicksan
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
Sep 1, 2015 10:42 AM
ammonllewis1
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
9
Aug 31, 2015 11:27 AM
petejeep95
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
4
Aug 22, 2015 11:39 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



