1989 cruise servo
#1
Newbie
Thread Starter
Join Date: Oct 2012
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
1989 cruise servo
Does anyone know the resistance I should be measuring across the position rheostat in the servo? The writeup referenced in this forum (excellent) says to check for continuity. I get a reading of about 6000 ohms, but am not sure if this is considered "continuity" TIA, Gary
#2
CF Veteran
Join Date: Apr 2012
Location: Wisconsin
Posts: 5,302
Likes: 0
Received 19 Likes
on
16 Posts
Model: Cherokee
If it is a rheostat you are measuring, that reading at least shows it is not "open", so you do have "continuity". Whether the 6K ohms reading is correct, I don't know. No clue what the exact resistance should be.
Thread
Thread Starter
Forum
Replies
Last Post
SergeK
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
02-27-2023 03:38 PM
RJSR
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
3
09-30-2015 06:59 PM
Endlessknight
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
4
09-26-2015 03:20 PM
Chick-N-Picker
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
7
09-21-2015 06:06 PM
Chick-N-Picker
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
09-18-2015 12:15 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)