Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here XJ (84-01)
All OEM related XJ specific tech. Examples, no start, general maintenance or anything that's stock.

1986 cherokee tail/marker lights not working

Thread Tools
 
Search this Thread
 
Old Mar 26, 2010 | 08:16 PM
  #1  
uglyoljeep's Avatar
Thread Starter
Newbie
 
Joined: Mar 2010
Posts: 24
Likes: 0
From: backwoods of kentucky
Year: 1996
Model: Cherokee
Engine: 6cy
Angry 1986 cherokee tail/marker lights not working

I have recently purchased a 1986 cherokee only to find that the tail lights dont work. The brake lights, turn signals, headlights all work fine...but no tail lights. All the fuses and bulbs are good...any suggestions before i hard wire them to my headlights?


I did a search for tail lamps and saw that someone was having this same problem..however they never really said how they fixed it..lol

Last edited by uglyoljeep; Mar 27, 2010 at 08:20 AM.
Reply
Old Mar 26, 2010 | 08:50 PM
  #2  
uglyoljeep's Avatar
Thread Starter
Newbie
 
Joined: Mar 2010
Posts: 24
Likes: 0
From: backwoods of kentucky
Year: 1996
Model: Cherokee
Engine: 6cy
Default

anyone?
Reply
Old Mar 26, 2010 | 10:06 PM
  #3  
uglyoljeep's Avatar
Thread Starter
Newbie
 
Joined: Mar 2010
Posts: 24
Likes: 0
From: backwoods of kentucky
Year: 1996
Model: Cherokee
Engine: 6cy
Default

bump..i really need some help with this..lol
Reply
Old Mar 27, 2010 | 03:03 AM
  #4  
uglyoljeep's Avatar
Thread Starter
Newbie
 
Joined: Mar 2010
Posts: 24
Likes: 0
From: backwoods of kentucky
Year: 1996
Model: Cherokee
Engine: 6cy
Default

Reply
Old Mar 27, 2010 | 04:32 AM
  #5  
El_Pedro's Avatar
Junior Member
 
Joined: Nov 2008
Posts: 38
Likes: 0
From: caledon, ontario
Year: 1990
Model: Cherokee
Engine: '92 4L I6 H.O.
Default

ok, so just to clarify, the taillights work, except when you have the headlights on they don't light up like they should? perhaps check with a voltmeter, and see if there is voltage getting there (could be a ground issue)
Reply
Old Mar 27, 2010 | 06:30 AM
  #6  
uglyoljeep's Avatar
Thread Starter
Newbie
 
Joined: Mar 2010
Posts: 24
Likes: 0
From: backwoods of kentucky
Year: 1996
Model: Cherokee
Engine: 6cy
Default

negative...the tail lights dont work at all..not even with head lights on
Reply
Old Mar 27, 2010 | 04:28 PM
  #7  
uglyoljeep's Avatar
Thread Starter
Newbie
 
Joined: Mar 2010
Posts: 24
Likes: 0
From: backwoods of kentucky
Year: 1996
Model: Cherokee
Engine: 6cy
Default

ok..so today i pulled every bulb from tail lights and marker lights, along with all the instrument lights..all was good..while i had all the lights out, i put the fuse back in the box for the tail lamps, and turned it on..again the fuse blew..i went and got a new head light switch, same thing... Im really starting to get agrivated.. can anyone help?!?!
Reply
Old Mar 27, 2010 | 06:14 PM
  #8  
anthnyajp's Avatar
Newbie
 
Joined: Mar 2010
Posts: 5
Likes: 0
Model: Cherokee
Default

Yeah I recently have the same problem. Everything works fine except my left rear marker/tail light does not work. I replaced the bulb and still nothing. My brake light works when I step on the brake pedal, as well does my reverse and blinker lights. For some reason the tail light does not work when I put my lights on.
Reply
Old Mar 27, 2010 | 06:45 PM
  #9  
GeeWhiz's Avatar
Newbie
 
Joined: Mar 2010
Posts: 17
Likes: 0
From: Darien Illinois
Year: 1990
Model: Cherokee
Engine: 4.0
Default

i had the same problem when i bought my 1990 limited. what you have to do is disconnect the lighting harness and check each wire with an ohm meter. the harness is behind the driver side kick panel. what i did was just keep unplugging connectors untill the fuse didnt blow. once the fuse doesn't blow you know you have isolated the short. mine had a bullet connector for the liscens plate light that was sorting out so fixing that solved my problem.
Reply
Old Mar 27, 2010 | 06:46 PM
  #10  
mike albo's Avatar
CF Veteran
 
Joined: Mar 2009
Posts: 8,712
Likes: 2
From: Loomis,California
Year: 1987
Model: Cherokee
Engine: 242 inline six
Default

do you have a trailer plug wired in? you may have a bare wire thats grounding out on the body,or a broken wire somewhere.
Reply
Old Mar 27, 2010 | 06:49 PM
  #11  
GeeWhiz's Avatar
Newbie
 
Joined: Mar 2010
Posts: 17
Likes: 0
From: Darien Illinois
Year: 1990
Model: Cherokee
Engine: 4.0
Default

also forgot to mention if you have a trailer lighting harness those can short out too. but you just have to keep testing for shorts good luck
Reply
Old Mar 27, 2010 | 07:08 PM
  #12  
uglyoljeep's Avatar
Thread Starter
Newbie
 
Joined: Mar 2010
Posts: 24
Likes: 0
From: backwoods of kentucky
Year: 1996
Model: Cherokee
Engine: 6cy
Default

you have gave me hope..lol
let me go get some tylonal and get to work!!!!
Reply
Old Mar 27, 2010 | 09:13 PM
  #13  
rdeskater's Avatar
Member
 
Joined: Jul 2009
Posts: 247
Likes: 0
From: Sullivan County NY
Year: 1994
Model: Cherokee
Engine: 4.0 High Output
Default

X2 check trailer light wiring, if not equipped check all grounds for the tailights from the fuse box back
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Aryl
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
12
May 5, 2024 10:29 PM
BayArea93xj
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
Jun 11, 2016 10:43 AM
rusty_bucket
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
Aug 29, 2015 06:42 AM
Buddylove1991
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
2
Aug 20, 2015 08:28 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 02:10 AM.