01 fenders on a 93?
Seasoned Member
Joined: Apr 2011
Posts: 328
Likes: 1
From: GSO NC
Model: Cherokee
Engine: 4.0L HO
oh, the area in front of the front wheel on 97-01 does not run below the front bumper like the earlier versions, the gap is covered by the front bumper cover with integral front fender flare. I bet it still bolts up though.
Thread Starter
Member
Joined: Sep 2011
Posts: 125
Likes: 0
Year: 1993
Model: Cherokee
Engine: 4.0 litre
okay thanks thats the reason i want some, haha
CF Veteran
Joined: Nov 2008
Posts: 7,874
Likes: 100
From: Northern Ontario, Canada
Year: 1990, 1999, 2000
Model: Cherokee
Engine: 4.0
yes, bolts right up. but the 97-01 fenders are rounded where as your 93 has squared edges. therefor the newer fenders won't match up nicely on your stock header panel.
with that said, you could swap your 93 header panel with the newer one and it will look factory. there is only a small splice needed on the wire harness for the marker lights under the headlight.
with that said, you could swap your 93 header panel with the newer one and it will look factory. there is only a small splice needed on the wire harness for the marker lights under the headlight.
Thread Starter
Member
Joined: Sep 2011
Posts: 125
Likes: 0
Year: 1993
Model: Cherokee
Engine: 4.0 litre
yes, bolts right up. but the 97-01 fenders are rounded where as your 93 has squared edges. therefor the newer fenders won't match up nicely on your stock header panel.
with that said, you could swap your 93 header panel with the newer one and it will look factory. there is only a small splice needed on the wire harness for the marker lights under the headlight.
with that said, you could swap your 93 header panel with the newer one and it will look factory. there is only a small splice needed on the wire harness for the marker lights under the headlight.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)