WTB Odd Items for Stock 2000 XJ
#1
Member
Thread Starter
Join Date: Jul 2011
Location: Atlanta / Florida
Posts: 199
Likes: 0
Received 1 Like
on
1 Post
Year: 2001
Model: Cherokee (XJ)
Engine: 4.0L
WTB Odd Items for Stock 2000 XJ
I'll probably be heading to the junkyard in about a week's time, but I figured I would try here first to put "some" money in fellow XJers pockets. Just picked up another XJ and want to fix little odds and ends.
Rails/mounts for driver's seat. Back right mount is snapped in half
Just the plastics for the exterior mirrors. Bad sun damage
"JEEP" emblem on front clip
Coolant overflow reservoir cap. Currently using aluminum foil... Bling bling
Radio harness... Quite the hack job
Some relatively nice aftermarket speakers for some oomph
Possibly a brake master cylinder; I'll bleed the brakes first, though
Brake pads/rotors (new)
Both rear "oh *****" handles... Currents are bleh
Also possibly interested in power leather seats from a limited. Currents are just fine, but this one is a driver, not a wheeler. I had my fun with the last XJ I had.
I'm sure I'll add more to the list as I tear it down; these are just some things I noticed since picking it up yesterday.
I'm locatated in Buford, GA about 40 minutes north of Atlanta.
Thanks!
-Tyler
Rails/mounts for driver's seat. Back right mount is snapped in half
Just the plastics for the exterior mirrors. Bad sun damage
"JEEP" emblem on front clip
Coolant overflow reservoir cap. Currently using aluminum foil... Bling bling
Radio harness... Quite the hack job
Some relatively nice aftermarket speakers for some oomph
Possibly a brake master cylinder; I'll bleed the brakes first, though
Brake pads/rotors (new)
Both rear "oh *****" handles... Currents are bleh
Also possibly interested in power leather seats from a limited. Currents are just fine, but this one is a driver, not a wheeler. I had my fun with the last XJ I had.
I'm sure I'll add more to the list as I tear it down; these are just some things I noticed since picking it up yesterday.
I'm locatated in Buford, GA about 40 minutes north of Atlanta.
Thanks!
-Tyler
#5
Seasoned Member
Join Date: Jan 2011
Location: Sacramento, CA
Posts: 430
Likes: 0
Received 2 Likes
on
2 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
I have some Pioneer fronts and some Eclipse rears if you are interested. Selling the Pioneer fronts because i already have Bostons i am using. Selling the Eclipse rears because i am upgrading to 6x9s. Let me know if you are interested, shoot me a PM.
Will
Will
Trending Topics
#9
Senior Member
Join Date: Jul 2011
Location: Wilmington, NC
Posts: 598
Likes: 0
Received 1 Like
on
1 Post
Year: 1997
Model: Cherokee
Engine: 4.0L
Next time I go to the pick n pull (which may be tomorrow) I can cut out a radio harness and throw it under my socket tray.
1. How much wire do you want off the plug?
2. What years will work? Not sure there is a 2000 but I know there are a couple 97s-99s
1. How much wire do you want off the plug?
2. What years will work? Not sure there is a 2000 but I know there are a couple 97s-99s
#10
Member
Thread Starter
Join Date: Jul 2011
Location: Atlanta / Florida
Posts: 199
Likes: 0
Received 1 Like
on
1 Post
Year: 2001
Model: Cherokee (XJ)
Engine: 4.0L
Thanks for looking out, Drew. I actually went ahead and installed a radio the other day... Couldn't wait on no tunes anymore.
Right now my big thing is getting seat rails/mounts for the driver's seat. I've had quite a few back surgeries and a FUBAR'd seat just won't fit the bill. I've been to three junkyards now with these either missing or broken already.
I also need, I guess it's call the regulator, for the front passenger power window. Motor still works and responds to input, but one of the cables that attach to the glass is broke /missing. More specifically if you are looking at it with the panel off, it is the one on the right side closest to the rear of the vehicle.
Right now my big thing is getting seat rails/mounts for the driver's seat. I've had quite a few back surgeries and a FUBAR'd seat just won't fit the bill. I've been to three junkyards now with these either missing or broken already.
I also need, I guess it's call the regulator, for the front passenger power window. Motor still works and responds to input, but one of the cables that attach to the glass is broke /missing. More specifically if you are looking at it with the panel off, it is the one on the right side closest to the rear of the vehicle.
Last edited by spazzyfry123; 08-04-2011 at 12:00 PM.
#12
CF Veteran
Join Date: Apr 2010
Location: knoxville, tn
Posts: 3,966
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 98 4.0 I6
is your seat mount on the floor okay....i got a driver seat that i could take apart if you could tell me specifically what you need...
#13
Member
Thread Starter
Join Date: Jul 2011
Location: Atlanta / Florida
Posts: 199
Likes: 0
Received 1 Like
on
1 Post
Year: 2001
Model: Cherokee (XJ)
Engine: 4.0L
Are those from a "charcoal" interior? Hard to tell from the picture. Don't have any pictures of the interior of my current, but it's the same color as my last:
I am 90% sure the problem is the mount that is on the floor, not the seat itself. I'll have to double check in the morning; memory fails after the three day brake job from hell I just finished. Different story for a different day...
If you got all the goodies, I'll shoot $35 your way for the lot.
-Tyler
If you got all the goodies, I'll shoot $35 your way for the lot.
-Tyler
#14
CF Veteran
Join Date: Apr 2010
Location: knoxville, tn
Posts: 3,966
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 98 4.0 I6
they came out of the xj with light grey interior but my xj i have right now has the charcoil: i will see tonight if there is any difference...