Parts or whole
Moderator of Jeeps
Joined: Jul 2011
Posts: 21,029
Likes: 3
From: Frederick, MD from Cleveland, OH
Year: 1993 YJ Wrangler
Engine: 4.0 I6
If you want to build a bastard pack, I have a set of '99 S10 Blazer springs with the eyes already cut off. We could meet between you and Frederick, MD for $50 if you're interested.
Moderator of Jeeps
Joined: Jul 2011
Posts: 21,029
Likes: 3
From: Frederick, MD from Cleveland, OH
Year: 1993 YJ Wrangler
Engine: 4.0 I6
I didn't build mine cause I found a great deal on some RE leaf springs. I don't want you to think I'm just trying to push my parts, but I encourage you to do some research on bastard packs. Look at the pros and cons, and the amount of work involved. If you're interested, let me know. These are just the S10 Blazer packs. They are not ready to be installed on a Cherokee.
Moderator of Jeeps
Joined: Jul 2011
Posts: 21,029
Likes: 3
From: Frederick, MD from Cleveland, OH
Year: 1993 YJ Wrangler
Engine: 4.0 I6
It's mix and match. You need new spring clips and a center bolt. You'll also need to mix and match your stock springs with the S10 springs. There's a lot of info on the Forum about them. You can check out dukie564's build thread, too, since he's making a high quality set now.
Thread
Thread Starter
Forum
Replies
Last Post
NM-XJ
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
18
Oct 23, 2018 04:21 PM
erupert66
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
7
Sep 15, 2015 02:07 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



